5.
to the seat base (Fig. 15). Separate shift bracket from
the choke cable and seat base.
Remove four long cap screws securing the shift plate
2. Loosen hose clamp and disconnect fuel hose from
the tank.
3.
Release tank strap from fuel tank. Do not remove
6.
Remove four hex head flange screws and flat wash-
strap from floor plate and frame cross member. Remove
tank from frame.
ers securing the front of the seat base to the frame. Re-
move four hex head flange screws securing the back of
the seat base to the frame.
Fuel Tank Installation (Fig. 16)
1.
cross member with tank strap.
Position fuel tank to frame. Secure tank to frame and
IMPORTANT:Make sure shift bracket, shift cables,
choke cable, and fuel tank do not catch on the seat
base during removal.
2.
Connect fuel hose to the tank and secure with hose
clamp.
7.
Lift seat base carefully from the machine.
3.
lation).
Install seat base to the frame (see Seat Base Instal-
Seat Base Installation (Fig. 14)
IMPORTANT:Make sure shift bracket, shift cables,
choke cable, and fuel tank do not catch on the seat
base during installation.
1.
Position seat base carefully to the frame.
Do not tighten fasteners securing the seat base
4
2
Note:
to the frame until all of them are installed.
5
2.
Install four hex head flange screws and flat washers
through the frame and to the front of the seat base.
Install four hex head flange screws through the frame
and into the back of the seat base. Tighten all fasteners.
1
3
3.
through the opening at the front of the seat base.
Place shift bracket, shift cables, and choke cable
4.
Position choke cable and shift plate to shift bracket
Figure 15
4.
5.
making sure to capture cable flange. Secure shift plate
to shift bracket with four short cap screws. Screw knob
onto the shift lever (Fig. 15).
1.
2.
3.
Shift lever
Cap screw (short)
Shift plate
Cap screw (long)
Choke cable
5.
Secure shift plate to seat base with 4 long cap screws
(Fig. 15).
Position shift plate with shift bracket to the seat base.
1
6.
On Workman 1110 machines, install parking brake
assembly to seat base (see Parking Brake Assembly in
the Service and Repairs section of Chapter 7 – Chassis,
Wheels, and Brakes).
Fuel Tank Removal (Fig. 16)
2
3
WARNING
Figure 16
3.
Use caution when working with fuel system com-
ponents (see Fill Fuel Tank and Fuel Safety Pre-
cautions).
1.
2.
Fuel hose
Fuel tank
Tank strap
1.
Remove seat base from the frame (see Seat Base
Removal).
Workman 1100/1110
Page 4 – 13 Rev. B
Kohler Gasoline Engine
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Workman 1100, Toro Workman 1110, Toro Workman 2100, Toro Workman 2110 |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)