Toro 02110SL Rev D Service Manual Workman 1100 1110 2100 2110 Preface Publication

Pivot Yoke Removal (Fig. 14 and 17)
Park machine  on a level  surface, stop engine,  set
3.  Secure pivot  yoke to  the rear  frame with four  cap
screws and flat washers.
1.
parking brake, and remove key from the ignition switch.
4.  Install seat base  to the front frame (see Seat Base
Installation in Engine Chapter).
2.
Remove cargo bed from the rear frame (see Cargo
Bed and Tailgate Removal).
5.  Install cargo bed to  the rear frame (see Cargo Bed
and Tailgate Installation).
3.
Remove seat base  from the front  frame (see Seat
Base Removal in Engine Chapter).
1
WARNING
Make sure  all tires  are chocked to  prevent the
machine from moving. Before removing the pivot
yoke,  make   sure  front   and  rear  frames   are
supported  with jack  stands.  Support both  the
front and back of each frame.
3
4.
the pivot yoke to the rear frame.
Remove four cap screws and flat washers securing
2
5.
the pivot yoke to the front frame tab.
Remove cap screw and hardened washer securing
5
6
4
WARNING
Figure 17
4.
5.
6.
1.
2.
3.
Cap screw & flat washer
Pivot yoke
Rear frame
Flange lock nut
Front frame
Diamond pattern
Support pivot  yoke while  removing it  from the
front  frame  to  prevent  dropping and  causing
serious injury and damage to the machine.
6.
nuts securing the pivot yoke to the front frame. Remove
pivot yoke from the machine.
Remove four flange  head screws and flanged lock
Pivot Yoke Installation (Fig. 14 and 17)
WARNING
Support pivot yoke while installing it to the front
frame to prevent dropping and  causing serious
injury and damage to the machine.
1.
Position pivot yoke to the front frame so the diamond
pattern faces up. Secure  yoke to front frame with  four
flange head screws and flanged lock nuts. Tighten lower
two fasteners first, then tighten upper two fasteners.
2.
Secure pivot  yoke to  the front  frame tab  with cap
screw and  hardened washer.  Torque cap  screw from
to 290 ft–lb (325 to 393 N–m).
240
Chassis, Wheels, and Brakes (Rev. B)
Page 7 – 24
Workman 1100/1110/2100/2110
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 194 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website