Service and Repairs
Drive Belt Service
Inspection
NOTE: Perform this maintenance procedure at the in-
terval specified in the Operator’s Manual.
1
1.
Park machine on a level surface, stop engine, en-
gage parking brake, and remove key from the ignition
switch.
3
2.
3.
Put vehicle transmission in neutral.
Rotate and inspect drive belt for excessive wear or
2
damage. Replace belt as necessary.
Replacement (Fig. 7)
1.
belt guides and rotate them away from belt.
If machine is equipped with drive belt guides, loosen
Figure 7
1.
2.
Belt guide
Drive belt
3.
Clearance location
2.
Rotate and route belt over the driven clutch. Remove
belt from the drive clutch.
3.
Place new belt around drive clutch. Position belt to
driven clutch. Rotate driven clutch while routing the belt
into position.
NOTE: The current drive belt used on Multi Pro 1200
and Multi Pro 1250 sprayers is double cogged. If ma-
chine has belt guides and a double cogged drive belt,
belt guides should be secured away from drive belt or re-
moved from machine.
4.
If sprayer is equipped with belt guides and belt has
a flat outer surface (not double cogged), position belt
guides to allow 1/8” to 3/16” (3.2 to 4.8 mm) clearance
between drive pulley and belt guide. Secure guides in
place after adjustment.
Multi Pro 1200/1250
Page 7 – 9 Rev. A
Drive Train
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Multi Pro 1200, Toro Multi Pro 1250 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)