6.
Install choke cable to engine and secure with cable
9. Position oil filter adapter with oil filter to the right hand
frame rail. Install two (2) flange head screws and flange
nuts and secure oil filter adapter to machine (Fig. 10).
clamp (Fig. 8 and 9). Check choke cable adjustment
(see Adjust Choke Cable in the Adjustments Section of
this Chapter).
10.Reinstall
the muffler/tailpipe section of the exhaust
7.
Reconnect accelerator cable to engine (Fig. 8 and
system (see Exhaust System Installation).
9).
11.
If hydraulic hoses were disconnected, make sure hy-
A. Position accelerator cable to the engine speed
control bracket.
draulic hoses and pump ports are clean. Install hydraulic
hoses to steering pump.
B. Slide the sleeve back on the cable ball joint and
place cable ball joint on ball stud. Release the sleeve
so it slides over the stud to secure cable.
12.Check engine oil level and transaxle/hydraulic fluid
level (see Operator’s Manual).
13.Connect
positive (+) and then negative (–) battery
C. Tighten cable jam nuts that secure accelerator
cable to control bracket.
cables to the battery.
14.Check
engine speed (see Adjust Engine Speed in
8.
If fuel line was removed, route fuel line through R–
the Adjustments Section of this Chapter).
clamps on mounting plate. Connect fuel line to the fuel
pump.
Multi Pro 1200/1250
Page 3 – 13
Kohler Gasoline Engine
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Multi Pro 1200, Toro Multi Pro 1250 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)