8.
Loosen and remove four (4) flange head screws and
flange nuts that secure pump to pump bracket. Remove
pump from bracket.
Loctite #242
5
5
7
6
Installation (Fig. 16 and 17)
12
8
1.
(4)
to bracket.
Position steering pump to pump bracket. Install four
flange head screws and flange nuts to secure pump
13
2. Make sure the pulley bore and pump shaft are clean.
Anti–seize
Lubricant
Apply anti–seize lubricant to both the pump shaft and
the bore of the pulley. Position key to pump shaft.
4
3
3
. Slide pulley onto shaft with the hub side of the pulley
9
away from the pump. Align pulley with the end of the
pump shaft.
1
10
2
11
4.
Apply Loctite #242 to two (2) set screws. Secure
pulley on the pump shaft with set screws.
Figure 17
5.
the engine mounting plate. Install two (2) flange head
screws through engine mounting plate into pump brack-
et.
Position hydraulic pump with pulley and bracket to
1.
Steering pump
8.
9.
Flange nut
O–ring
2.
Flange head screw
Pump bracket
Pulley
3
.
.
10. O–ring
4
11. Suction fitting
12. Pressure hose
13. O–ring
5.
6.
7.
Set screw
Key
Flange head screw
6.
7.
8.
Install drive belt to the pump pulley.
Adjust belt tension (see Operator’s Manual).
Remove any plugs or caps that were placed during
disassembly. Connect hydraulic hoses to pump.
9.
Check fluid level in transaxle and adjust as required
(see Operator’s Manual).
Multi Pro 1200/1250
Page 4 – 21
Hydraulic System
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Multi Pro 1200, Toro Multi Pro 1250 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |