25.Install
L.H. axle shaft assembly:
A. Thoroughly clean mating surface of differential
carrier and side cover (Item 2).
2
B. Insert selected shims (Item 1) into housing of side
cover. NOTE: The thickest shim should be inserted
against the bearing.
1
Figure 101
C. Install axle shaft assembly and secure with cap
screws (Item 1). Torque cap screws from 18 to 22 ft–
lb (24.5 to 29.5 N–m).
18
(24.5
to 22 ft–lb
to 29.5 N–m)
1
Figure 102
26.Measure
backlash of ring gear through P.T.O. cover
opening on top of transaxle. Using a dial indicator, check
ring gear backlash in three equally spaced points. Back-
lash should be .0031” to .0071” (0.08 to 0.18 mm) and
must not vary more than .002” (0.05 mm) at the points
checked. If backlash is not in this range, replace shim
set in end of differential carrier:
A. If backlash is less than target range, decrease to-
tal thickness of shim set until correct backlash is
achieved.
B. If backlash exceeds the target range, increase to-
tal thickness of shim set until correct backlash is
achieved.
Figure 103
NOTE: The thickest shim should be installed
against the bearing.
Multi Pro 1200/1250
Page 7 – 55
Drive Train
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Multi Pro 1200, Toro Multi Pro 1250 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)