Steering Control Valve
Removal (Fig. 19)
5. Check fluid level in transaxle and adjust as required
(see Operator’s Manual).
1.
Park the machine on a level surface, engage parking
brake, and stop engine. Remove key from the ignition
switch.
6. After assembly is completed, operate steering cylin-
der to verify that hydraulic hoses and fittings are not con-
tacted by anything.
CAUTION
6
Rotate steering wheel to relieve system pres-
sure and avoid injury from pressurized hydrau-
lic oil.
5
7
2.
poses. Clean hydraulic hose ends prior to disconnecting
the hoses.
Label all hydraulic connections for reassembly pur-
4
8
3.
Remove fasteners that secure dash panel to front
2
hood (Fig. 20). Top of panel is secured with five (5)
screws. Sides of panel are fastened with four (4) screws,
flat washers, and lock nuts. Carefully slide dash panel
up steering column to allow access to steering control
valve.
3
1
Figure 19
1.
2.
3.
4.
Steering cylinder
5.
6.
7.
8.
Steering control valve
Cap screw (4 used)
Steering column
4.
Disconnect hydraulic hoses connected to the steer-
Hyd hose (Left turn)
Hyd hose (Right turn)
Hyd hose (from pump)
ing control valve. Allow hoses to drain into a suitable
container. Cap or plug openings of control valve and
hoses to prevent contamination.
Hyd hose (to filter)
5.
ling during removal.
Support steering control valve to prevent it from fal-
1
6.
Loosen and remove four (4) cap screws that secure
steering column and steering control valve to machine
frame.
2
7.
Slide steering column from control valve. Remove
control valve from machine.
Installation (Fig. 19)
1.
Position steering control valve to frame. Slide steer-
ing column to control valve. Secure steering column and
control valve to frame with four (4) cap screws.
2.
Remove caps and plugs from disconnected hoses
and fittings.
3.
Connect hydraulic hoses to steering control valve
(Fig. 19). Tighten hose connections.
Figure 20
1.
Steering wheel
2.
Dash panel
4.
Position dash panel to front hood and secure with
fasteners (Fig. 20).
Multi Pro 1200/1250
Page 4 – 25
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Multi Pro 1200, Toro Multi Pro 1250 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)