Toro 03113SL Rev E Greensmaster 3150 Service Manual

Removal (Fig. 62)
Before removing any parts from the hydraulic sys-
1.
tem, park the machine on a  level surface, engage the
parking brake, lower the cutting units, and stop the en-
gine.
CAUTION
Before continuing further, read and  become fa-
miliar with  General  Precautions for  Removing
and Installing Hydraulic System Components.
2.
Remove screw (10) and steering wheel cover (11)
from the steering wheel (8).
(P2) OUTPUT TO STEERING VALVE
Figure 63
3.
Remove steering wheel nut (9) and steering wheel
from the steering column assembly.
Installation (Fig. 62)
4.
Remove screws (14) and remove the steering valve
cover (26).
1.   If removed, install hydraulic fittings (19 and 23) and
O--rings (20) to the steering control valve (33 or 34).
5.
Remove cap screws (12). Remove steering column
(15)
(if equipped) and steering control valve (33 or 34).
2.   Install hose assemblies  (22) and O--rings (21 and
24).
6.
semblies. Labelall hydraulic connections forreassemb-
ly.
Cut and remove any  cable ties from the hose  as-
Note:
Connect any  hydraulic hose  assemblies (22)
that may have been disconnected at the manifold block
P2 or ST ports, at the steering cylinder, or at the hydrau-
lic pump (Fig. 63) if necessary.
7.
rings (21 and 24) from hydraulic fittings (19 and 23). Al-
low hoses to drain into a suitable container.
Disconnect hose assemblies (22) and remove  O--
3.   Installanycabletiesremovedfromthehoseassem-
blies.
Note:
Disconnect hydraulic hose assemblies (22)  at
the manifold block P2 or ST ports, at the steering cylin-
der, or at the hydraulic pump (Fig. 63) if necessary.
4.   Install steering column assembly (if equipped) and
steering control valve (33 or 34) to steering mount with
cap screws (12).
8.
If necessary, remove hydraulic fittings and O--rings
from steering control valve.
5.   Install  steering valve  cover (26) with  cap screws
(14).
6.
Install steering  wheel (8) and  nut (9). Torque  nut
from 20 to 26 ft--lb (28 to 35 Nm).
7.
Secure steering wheel cover (11) with screw (10).
Greensmaster 3150
Page 4 -- 91
Hydraulic System (Rev. E)
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 306 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(1 votes, average: 2 out of 2)
Lawn and Garden readers have rated Toro 03113SL Rev E Greensmaster 3150 Service Manual 2.0 out of 2.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Toro 03113SL Rev E Greensmaster 3150 Service Manual SKU UPC Model
kurt on May 29, 2014.

Safety switches not working


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website