Toro 03113SL Rev E Greensmaster 3150 Service Manual

Right and Left Turn
The gear pump (P2) is directly coupled to the hydrostat
through gear pump (P1). It supplies hydraulic pressure
tothepower  steeringvalve forturningtherear  wheel,for
raising and lowering the cutting units, and for maintain-
ing 100 to 150 PSI (6.9 to 10.0 Bar) to the low pressure
side of the traction circuit (charge pressure). The gear
pump (P2) takes its suction from the hydraulic reservoir.
Maximum circuit pressure is limited by relief valve (R5).
amount of the turning on the steering wheel. Fluid leav-
ing the cylinder flows back through the spool valve and
outport (T). The returning flow passes through the man-
ifold block (using ports ST and PT) and on to the hydros-
tat.
The steering wheel and steering control valve return to
the neutral position when turning is complete.
Left Turn
With the  steering  wheel in  the neutral  position (rear
wheel positioned straight  ahead) and the engine  run-
ning, the spool valve is in the center position. Flow en-
ters  the steering  control valve  at  Port (P)  and goes
through the spool valve, by--passing the steering cylin-
der. Flow leaves the control valve out port (E) and con-
tinues through solenoid valve (S2) to the hydrostat.
When a left turn is  made with the engine running, the
turningofthesteeringwheelpositionsthespoolvalveso
that flow goes through the bottom of the spool. Flow en-
tering the steering control valve at Port (P) goes through
the spool and is routed to two places. First, most of the
flow through the valve is  by--passed out port (E) back
through solenoid valve (S2)  to the hydrostat. Second,
the remainder of the flow is drawn through rotary meter
(V1) and out port (L). Pressure moves the piston in the
direction foraleftturn.Therotary   meterensures thatthe
oilflowtothecylinderisproportionaltotheamountofthe
turning on the steering wheel. Fluid leaving the cylinder
flows back through the spool valve and out port (T). The
returning flow passes through the manifold block (using
ports ST and PT) and on to the hydrostat.
Right Turn
When a right turn is made with the engine running, the
turningofthesteeringwheelpositionsthespoolvalveso
thatflowgoesthroughthetopofthespool.Flowentering
the steering control valve at Port (P) goes through the
spool and is routed to two places. First, most of the flow
through  the  valve  is  by--passed  out  port  (E)  back
through solenoid valve (S2)  to the hydrostat. Second,
theremainderoftheflowisdrawnthroughtherotaryme-
ter (V1) and out port (R). Pressure moves the piston in
the direction for a right turn. The rotary meter ensures
that the  oil flow  to the  cylinder is  proportional to the
The steering wheel and steering control valve return to
the neutral position when turning is complete.
Greensmaster 3150
Page 4 -- 21
Hydraulic System (Rev. E)
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 306 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(1 votes, average: 2 out of 2)
Lawn and Garden readers have rated Toro 03113SL Rev E Greensmaster 3150 Service Manual 2.0 out of 2.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Toro 03113SL Rev E Greensmaster 3150 Service Manual SKU UPC Model
kurt on May 29, 2014.

Safety switches not working


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website