Joystick Raise and Lower Switches
The joystick raise and lower switches are located on the
lift control mechanism. The rear switch is used to lower
thereels andthe frontswitch toraise them(Fig. 17).The
switches are identical and are shown in Figure 18.
FRONT
1
1.
Make sure the engine and ignition switch is Off. Re-
move the plastic cover and disconnect the harness con-
nectors from the switches.
3
2.
ing a multimeter (ohms setting) across the switch con-
nector terminals as follows:
Check the continuity of the raise switch by connect-
2
A. With the joystick in the rest position, continuity
should only exist between the common and NC ter-
minals (blue and green/black wires).
Figure 17
3.
1.
2.
Joystick assembly
Raise switch
Lower switch
B. With the joystick in the raise position, continuity
should only exist between the common and NO ter-
minals (blue and green/gray wires).
1
3.
Check the continuity ofthe lower switch by connect-
ing a multimeter (ohms setting) across the switch con-
nector terminals as follows:
2
4
A. With the joystick in the rest position, continuity
should only exist between the common and NC ter-
minals (open terminal and green/black wires).
3
B. With the joystick in the lower position, continuity
should only exist between the common and NO ter-
minals (green/black and gray/black wires).
Figure 18
3.
4.
1.
2.
Common terminal
NO terminal
NC terminal
Switch lever
4.
joystick switches, and reinstall the plastic cover.
After testing, connect the harness connectors to the
Backlap Switch (If Equipped)
The backlap switch is located on the hydraulic manifold
(when the Backlap Kit is installed). It is normally open
and closes when the backlap knob is turned to the back-
lap position.
2
3
1.
2.
multimeter (ohms setting) across the connector termi-
nals.
With the engine off,disconnect electrical connector.
Check the continuity of the switch by connecting a
1
3.
position while watching the multimeter. Continuity
should be made as the switch closes.
Turn the backlap knob clockwise to the backlap
Serial Number
230000801
To
260999999
Shown
4.
Turnthebacklapknobcounterclockwise tothemow
position while watching the multimeter. Continuity
should be broken as the switch opens.
Figure 19
3.
1.
2.
Connector
Backlap switch
Backlap knob
5.
Reconnect the electrical connector.
Page 5 -- 14 Rev. E
Electrical System
Greensmaster 3150
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Greensmaster 3150 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(1 votes, average: 2 out of 2) Lawn and Garden readers have rated Toro 03113SL Rev E Greensmaster 3150 Service Manual 2.0 out of 2.0 based on 1 product reviews.
Safety switches not working