Left Side Plate Service (Fig. 18)
Right Side Plate Service (Fig. 18)
1.
grease seal (9) from the side plate (6).
Remove the inner grease seal (13) and outer
1. Remove the inner grease seal (13) and outer
grease seal (9) from the side plate (10).
2.
Remove the retaining ring (14) securing the bearing
2. Remove the bearing (12). Inspect the bearing to in-
sure that it spins freely and has minimal axial play. The
bearing balls must be free of deformation and scoring.
Replace the bearing if necessary.
in the side plate. Remove the bearing (12). Inspect the
bearing to insure that it spins freely and has minimal ax-
ial play. The bearing balls must be free of deformation
and scoring. Replace the bearing if necessary.
3.
Remove the O−ring (11) from the groove in the side
3.
4.
5.
Remove the wave washer (15).
plate bore.
Remove all grease from the side plate bore.
Insert the wave washer (15) into the side plate.
4. Remove all grease from the side plate bore.
Note:
Replacement Seal Kit (Toro Part No. 106-6937)
is available for side plate service of dual point adjust cut-
ting units.
Note:
is available for side plate service of dual point adjust cut-
ting units.
Replacement Seal Kit (Toro Part No. 106-6937)
5. Insert the O−ring (11) into the groove in the side
plate. Apply a light coating of grease onto the O−ring, af-
ter it is installed.
6.
Pack the bearing (12) with Mobil High Temperature
HP or equivalent grease. Insert the bearing into the side
plate against the wave washer.
6. Pack the bearing (12) with Mobil High Temperature
HP or equivalent grease. Insert the bearing into the side
plate until it is against the bottom of the bore.
7.
Press the retaining ring (14) into the groove, slightly
compressing the bearing and wave washer.
7.
Temperature HP or equivalent grease.
Pack the cavity of the inner seal (13) with Mobil High
8.
Temperature HP or equivalent grease.
Pack the cavity of the inner seal (13) with Mobil High
8.
Using inner grease seal installation washer (Toro
9.
Using inner grease seal installation washer (Toro
Part Number 104-0532) press the inner seal (13) into
the side plate until the washer is flush with the outer
edge of the side plate bore. Remove the washer. When
properly installed, the seal should be positioned .104 in.
Part Number 104-0532) press the inner seal (13) into
the side plate until the washer is flush with the outer
edge of the side plate bore. Remove the washer. When
properly installed, the seal should be positioned .104 in.
below the inner edge of the side plate bore.
(2.6
mm) below the inner edge of the side plate bore.
9.
flush with the the outer edge of the side plate bore.
Press the outer seal (9) into the side plate until it is
10.
flush with the the outer edge of the side plate bore.
Press the outer seal (9) into the side plate until it is
IMPORTANT: The outer grease seal (9) should be
installed so the lip is facing out. This helps keep
contamination from entering, and allows grease to
vent or purge out if necessary (Fig. 22).
IMPORTANT: The outer grease seal (9) should be
installed so the lip is facing out. This helps keep
contamination from entering, and allows grease to
vent or purge out if necessary (Fig. 22).
10.
and outer grease seal (9) lips with Mobil High Tempera-
ture HP or equivalent grease.
Fill remaining voids, behind inner grease seal (13)
11.
and outer grease seal (9) lips with Mobil High Tempera-
ture HP or equivalent grease.
Fill remaining voids, behind inner grease seal (13)
Dual Point Adjust Cutting Units
Page 10 - 16
Greensmaster 3150
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Greensmaster 3150 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(1 votes, average: 2 out of 2) Lawn and Garden readers have rated Toro 03113SL Rev E Greensmaster 3150 Service Manual 2.0 out of 2.0 based on 1 product reviews.
Safety switches not working