6
1
8
7
5
4
2
3 4
5
Figure 13
1.
2.
3.
4.
Sideplate
5.
6.
7.
8.
Washer (metal)
Bedbar
Bedbar pivot bolt
Flange nut
Rubber bushing
Flange bushing
Washer (plastic)
4.
(4)
Slide one metal washer (5) and one plastic washer
onto each bedbar pivot bolt. The metal washer (5)
must contact the flange nut (8) (Fig. 13).
5.
Position bedbar (6) into cutting unit. Slide the top of
the bedbar arms between washers on each adjuster as-
sembly.
6.
Position one metal washer (5) and one plastic wash-
er (4) between bedbar and each side plate. The metal
washer (5) must contact the bedbar (Fig. 13).
7.
Install the bedbar pivot bolt assemblies. Tighten
each bedbar pivot bolt from 190 to 240 in−lbs (21 to 27
Nm).
8.
Tighten both flange nuts (8) to remove end play at
the outer washers. Do not over tighten the flange nuts
or distort the side plates.
9.
Tighten the lock nut (15) on each bedbar adjuster
assembly until the adjuster spring is fully compressed,
then loosen lock nut 1/2 turn.
10.
Adjust cutting unit (see Cutting Unit Operator’s
Manual).
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Greensmaster 3150 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
Safety switches not working