Bearing Installation
Install new bearings in both side plate assemblies
2
1
1.
3
4
(Fig. 13):
A. Slide new bearings into non--drive side plates.
Positionextendedinnerraceofbearingstowardcen-
ter of side plate housing.
B. Press new bearings into drive side plates apply-
ing pressure to outer bearing race only. Position ex-
tended inner race of bearings toward center of side
plate housing.
5
C. Install new seals into side plates. Note: Seals
should be installed so the lip side of the seal will face
the center of the cutting reel. When bearings are
greased, grease will purge from inner seals.
Figure 14
1.
2.
3.
Socket head screw
Motor mount
4.
5.
Cutting unit
Lock nut (2 used)
Groomer side plate (RH)
2.
Install non--drive groomer side plate to cutting unit:
A. Position non--drive groomer side plate to cutting
unit making sure that groomer arm lift rod is posi-
tioned through bushing in side plate.
1
B. Apply antisieze lubricant to threads of lift arm as-
sembly stud. Place spring washer and lock nut on lift
rod threads (Fig. 15). Tighten lock nut.
2
C. Position motor mount to groomer side plate (Fig.
3
14).
Secure motor mount and groomer side plate to
cutting unit with two (2) socket head screws and lock
nuts.
D. Installhydraulic reelmotor tocuttingunit(seeHy-
draulic Reel Motor Installation in theService andRe-
pairs section of Chapter 10 -- DPA Cutting Units).
Figure 15
1.
2.
LH groomer side plate
Lock nut/spring washer
3.
LH groomer arm
3.
plate (see Groomer Reel Installation in this section).
Install groomer reel and drive side groomer side
4.
Lubricate groomer bearings (see Groomer Reel Kit
Installation Instructions).
Note:
After greasing groomer bearings, operate
groomer for 30 seconds, stop machine and wipe excess
grease from groomer shaft and seals.
5.
Check and adjust groomer reel height and mower
height--of--cut settings.
Greensmaster 3150
Page 10.1 -- 13
Groomer (DPA Cutting Unit) (Rev. A)
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Greensmaster 3150 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(1 votes, average: 2 out of 2) Lawn and Garden readers have rated Toro 03113SL Rev E Greensmaster 3150 Service Manual 2.0 out of 2.0 based on 1 product reviews.
Safety switches not working