Toro 03113SL Rev E Greensmaster 3150 Service Manual

Bedknife Replacement
1.
2.
3.
Remove bedbar.
Remove bedknife screws and remove bedknife.
Remove all rust, scale, and corrosion from bedbar
surface before installing the bedknife.
4.
Install  new  bedknife  with  new  bedknife  screws
(57-4910).
Apply clean SAE 30 oil to the screws before
installing screws. Tighten the screws to a torque of 200
to 250 in-lb. working from the center toward each end of
the bedbar (Fig. 25).
5.
Grind the new bedknife to match it to the bedbar.
Figure 25
Note:
dures  in the  Toro  publication  “Sharpening Reel  and
Rotary Mowers”, Form No. 80-300-PT.
For proper  grinding of bedknife, follow  proce-
6.
Install the bedbar.
Preparing Reel for Grinding
IMPORTANT: Adjust  reel bearings before grinding
reel. (See Reel Bearing Service  and Adjustment in
the Adjustments section of this chapter).
1.
Remove bedbar.
Note:
Some reel grinders may require rear roller as-
sembly be mounted to the cutting unit for proper support
in reel grinder. Rear roller must be parallel to reel shaft
to remove taper when grinding.
2.
If necessary, remove front roller assembly.
A.  Loosen the locknuts securing height of  cut ad-
justing rods at both ends of the cutting unit and the
roller shaft clamp bolts (Fig. 26).
Figure 26
Rear roller height of cut bracket
Allen set screw
Bedbar mounting bolts
Bedknife adjusting screws
Height of cut rod locknuts
Roller shaft clamp bolts
Height of cut adjustment knob
B.  Turn height of  cut adjustment knobs until  they
are disconnected  from the height of  cut adjusting
rods (Fig. 26). The roller assembly can then be re-
moved from  the cutting  unit by  pulling evenly  on
both sides.
1.
2.
3.
4.
5.
6.
7.
For proper grinding of reel, follow procedures in the Toro
publication  “Sharpening  Reel  and  Rotary  Mowers”,
Form No. 80-300-PT.
3.
Install bedbar. After grinding, assemble cutting unit,
and do all adjustments. Backlap if necessary to get de-
sired fit between reel and bedknife.
Repairs
Page 7 - 18
Greensmaster 3150
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 306 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(1 votes, average: 2 out of 2)
Lawn and Garden readers have rated Toro 03113SL Rev E Greensmaster 3150 Service Manual 2.0 out of 2.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Toro 03113SL Rev E Greensmaster 3150 Service Manual SKU UPC Model
kurt on May 29, 2014.

Safety switches not working


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website