6.
taking care not to get grease on belt surface. Slide drive
pulley onto the reel shaft.
Apply grease to drive pulley splines and pulley hub
13.Apply antisiezelubricanttothreadsofliftarmassem-
bly stud on groomer arm. Install spring washer (item 24)
and lock nut (item 25) to secure drive side groomer arm
assembly to groomer side plate (Fig. 7).
7.
Apply anti--seize lubricant to threads of flange head
screw (item 4) used to attach drive pulley to reel shaft.
Secure drive pulley to reel with washer (item 5) and
flange head screw.
14.Center front roller and tighten cap screws (item 20)
to secure roller (Figs. 7 and 8).
15.Install
groomerdrivebeltandbeltcovertosideofcut-
8.
install driven pulley onto the groomer shaft. Thread
flange nut (item 17) onto the shaft threads.
Place square key (item 31) in groomer shaft slot and
ting unit (see Groomer Belt Replacement in this sec-
tion).
16.Install
hydraulic reel motor onto cutting unit (see Hy-
9.
17)
Secure groomer reel by holding the flange nut (item
on one end of the reel and tightening the flange nut
draulic Reel Motor Installation in the Service and Re-
pairs section of Chapter 10 -- DPA Cutting Units).
on the other end of groomer shaft. Torque flange nuts
from 100 to 120 in--lb (11.3 to 13.6 N--m).
17.If
unit.
equipped, install rotating rear roller brush tocutting
10.Apply
Loctite #242 (or equivalent) to threads of cap
18.Lubricate
Installation Instructions).
groomer bearings (see Groomer Reel Kit
plug (item 21). Install cap plug into non--drive side plate
and torque cap plug from 60 to 80 ft--lb (81 to 108 N--m)
(Fig. 8).
Note:
After greasing groomer bearings, operate
groomer for 30 seconds, stop machine and wipe excess
grease from groomer shaft and seals.
11.
Insert front roller into non--drive side groomer arm.
drive side groomer arm to front roller,
12.Position
19.Check
groomerreelheightandmowerheight--of--cut
groomer drive side plate and cutting unit frame. Secure
groomer arm to cutting unit with carriage bolt, tab wash-
er and flange nut.
settings. Adjust as needed.
Groomer (DPA Cutting Unit) (Rev. A)
Page 10.1 -- 10
Greensmaster 3150
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 3150 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 2 out of 2)
Lawn and Garden readers have rated Toro 03113SL Rev E Greensmaster 3150 Service Manual 2.0 out of 2.0 based on 1 product reviews. Safety switches not working