Maintenance and Service
26.
chine, stop the engine, remove key from switch to pre-
vent accidental starting of the engine.
Before servicing or making adjustments to the ma-
other parts of the body away from the cutting units, at-
tachments and any moving parts. Keep everyone away.
34.
Do not overspeed the engine by changing governor
27.
tion. Keep all nuts, bolts, screws and hydraulic fittings
tight.
Be sure entire machine is in good operating condi-
settings. Toassure safety and accuracy,have anAutho-
rized Toro Distributor check maximum engine speed
with a tachometer. Maximum governed engine speed
should be 2850 + 50 RPM.
28.
Makesureallhydrauliclineconnectorsaretight,and
all hydraulic hoses and lines are in good condition be-
fore applying pressure to the system.
35. Engine must be shut off before checking oil or ad-
ding oil to the crankcase.
29.
Keep body and hands away from pin hole leaks or
36. If major repairs are ever needed or if assistance is
desired, contact an Authorized Toro Distributor.
nozzles that eject hydraulic fluid under high pressure.
Use paper or cardboard, not hands, to search for leaks.
Hydraulic fluid escaping under pressure can have suffi-
cient force to penetrate skin and do serious damage. If
fluidisejectedintotheskinitmustbesurgicallyremoved
within a few hours by a doctor familiar with this form of
injury or gangrene may result.
37.
3150
At the time of manufacture, the GREENSMASTER
conformed to safety standards in effect for riding
mowers. To make sure of optimum performance and
continued safety certification of the machine, use genu-
ine TORO replacement parts and accessories. Re-
placement parts and accessories made by other
manufacturers could be dangerous, and such use could
void the product warranty of The Toro Company.
30.
Before disconnecting orperforming anywork onthe
hydraulic system, all pressure in system must be re-
lievedbystopping engineand lowering cutting units and
attachments to the ground.
38.
When changing attachments, tires, or performing
other service, use correct blocks, hoists, and jacks.
Make sure machine is parked on a solid level floor such
as a concrete floor. Prior to raising the machine, remove
any attachments that may interfere with the safe and
proper raising of the machine. Always chock or block
wheels. Use jack stands or solid wood blocks to support
the raised machine. If the machine is not properly sup-
ported by blocks or jack stands, the machine may move
or fall, which may result in personal injury.
31.
To reduce potential fire hazard, keep the engine
area free of excessive grease, grass, leaves and accu-
mulation of dirt. Never wash a warm engine or electrical
connections with water.
32.
lar basis, and tighten or repair as needed.
Checkallfuellinesfortightnessandwearonaregu-
33.
If the engine must be running to perform a mainte-
nance adjustment, keep hands, feet, clothing and any
Safety and Instruction Decals
Numerous safety and instruction decals are affixed to
the traction unit and the cutting units of the Greensmas-
ter 3150. If any decal becomes illegible or damaged, in-
stall a new decal. Part numbers are listed in your Parts
Catalog and Operator’s Manual. Order replacement de-
cals from your Authorized Toro Distributor.
Safety
Greensmaster 3150
Page 1 -- 4
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Greensmaster 3150 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(1 votes, average: 2 out of 2) Lawn and Garden readers have rated Toro 03113SL Rev E Greensmaster 3150 Service Manual 2.0 out of 2.0 based on 1 product reviews.
Safety switches not working