Removal (Fig. 56)
Park machine on a level surface, lower cutting deck,
stop engine, apply parking brake and remove key from
the ignition switch.
Installation (Fig. 56)
1.
1. If fittings were removed from motor, lubricate and
place new O--rings onto fittings. Install fittings into port
openingsusingmarksmadeduringtheremovalprocess
to properly orientate fittings. Tighten fittings (see Hy-
draulic Fitting Installation in the General Information
section of this chapter).
2.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the General Precautions for Removing and
2.
If removed, install pinion gear to axle motor.
NOTE: To ease installation, tag the hydraulic hoses to
show their correct position on the axle motor.
3. Install O--ring onto motor. Position motor to rear axle
assembly making sure that arrows on the side of motor
case point upward. Align gear teeth and slide motor into
place.
3.
Disconnect hydraulic hoses from motor. Put caps or
plugs on motor ports and hose openings to prevent con-
tamination.
4.
ers. Torque screws from 59 to 73 ft--lb (80 to 99 N--m).
Secure motor to axle with cap screws and flat wash-
IMPORTANT: Support axle motor to prevent motor
from falling during removal.
5.
Attach hydraulic hoses to axle motor.
Remove plugs from motor ports and hose openings.
4.
guide.
Remove motor from rear axle using Figure 56 as a
6.
Fill reservoir with hydraulic fluid as required.
5.
If hydraulic fittings are to be removed from motor,
mark fitting orientation to allow correct assembly. Re-
move fittings from motor and discard O--rings.
7. After assembly is completed, verify that hydraulic
hoses and fittings do not contact anything.
Groundsmaster 4100--D
Page 4 -- 79
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 30413, Toro Groundsmaster Groundsmaster 4100 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
At only 700mm wide the Mini Dumper is even at home on tight access
sites. No need to grunt, groan, and force the
mower about the yard. The US will be getting a revised 2011 Jeep Wrangler but the diesel option will not be offered in the United States.