5.
knucklepin.Removethegasketandanyremaininggas-
ket material from either mating surface (Fig. 18).
Remove the knuckle pin mounting screws and the
2
1
3
6.
of the bevel gear shaft out of the upper bearing and up-
per bevel gear.
While holding the bevel gear case, tapthe upper end
17 to 20 ft--lb
23 to 27 N--m)
(
Threadlocking
Compound
4
7.
Pull the bevel gear case from the axle case and re-
move the upper bevel gear and collar from the gear
case.
5
14
8.
O-ring from the axle case.
Remove the axle case cover screws, cover and the
7
8
1
5
11
9.
Removetheplugandsealingwasherfromthecenter
of the axle case cover. While holding the axle case cov-
er, lightly tap the lower end of the bevel gear shaft out of
the lower bearing and lower bevel gear.
6
10.Remove
and discard bevel gear shaft seal from axle
case (Fig. 18).
13
12
9
10
17
(23
to 20 ft--lb
to 27 N--m)
Figure 18
9. Lower bevel gear
10. Lower bearing
11. Axle case
12. Axle case cover
13. O-ring
1.
2.
3.
4.
5.
6.
7.
8.
Knuckle pin
Mounting screw (4 used)
O--ring
Bevel gear case
Upper bearing
Bevel gear shaft
Collar
14. Shaft seal
15. Bushing
Upper bevel gear
Bevel Gear Case and Axle Case Inspection
1.
port bushing I.D. to determine the bushing to pin clear-
ance (Fig. 19). Replace components as necessary.
MeasuretheknucklepinO.D.andtheaxlecasesup-
1
2
BUSHING TO PIN CLEARANCE:
0.002
to 0.016 in. (0.05 to 0.40 mm)
KNUCKLE PIN O.D. (Factory Spec.):
0.982
to 0.983 in. (24.95 to 24.98 mm)
AXLE CASE SUPPORT BUSHING I.D.
(Factory Spec.):
0.984
to 0.987 in. (25.00 to 25.08 mm)
Figure 19
2. Axle case support
1.
Knuckle pin
2.
for damage and wear. Replace components as neces-
sary.
Inspect all gears, shafts, bearings, cases andcovers
Axles, Planetaries and Brakes
Page 6 -- 18
Groundsmaster 4100--D
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 30413, Toro Groundsmaster Groundsmaster 4100 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
At only 700mm wide the Mini Dumper is even at home on tight access
sites. No need to grunt, groan, and force the
mower about the yard. The US will be getting a revised 2011 Jeep Wrangler but the diesel option will not be offered in the United States.