Fuel Tank Installation (Fig. 7)
DANGER
1.
Install fuel tank using Figure 7 as a guide.
A. Torque two (2) flange nuts that secure the fuel
tank to the frame from 60 to 80 in--lb (7 to 9 N--m).
Becausedieselfuelishighlyflammable,usecau-
tion when storing or handling it. Do not smoke
while filling the fuel tank. Do not fill fuel tank
while engine is running, hot or when machine is
in an enclosed area. Always fill fuel tank outside
and wipe up any spilled diesel fuel before start-
ing the engine. Store fuel in a clean, safety--ap-
proved container and keep cap in place. Use die-
sel fuel for the engine only; not for any other
purpose.
2.
3.
Install two (2) tank covers to ROPS assembly.
Connect fuel hose to the standpipe and venting
hoses to the elbow fittings.
4.
Connect electrical wiring to the fuel sender.
A. Connect white wire to the center terminal and
black wire to any of the screws that secure the fuel
sender to the fuel tank.
Check Fuel Lines and Connections
Check fuel lines and connections periodically as recom-
mended in the Operator’s Manual. Check lines for dete-
rioration, damage, leaks or loose connections. Replace
hoses, clamps and connections as necessary.
B. Apply skin--over grease to the wire terminal con-
nections.
CAUTION
Empty and Clean Fuel Tank
Empty and clean the fuel tank periodically as recom-
mended in the Operator’s Manual. Also, empty and
clean the fuel tank if the fuel system becomes contami-
nated or if the machine is to be stored for an extended
period.
Connecting battery cables to the wrong battery
post could result in personal injury and/or dam-
age to the electrical system.
5.
Positionbatteryinmachine.Connectpositivebattery
cable first and then negative battery cable. Install bat-
tery strap and cover.
To clean fuel tank, flush tank out with clean diesel fuel.
Make sure tank is free of contaminates and debris.
6.
7.
Lower seat and hood.
Fill fuel tank.
Fuel Tank Removal (Fig. 7)
1.
Park machine on a level surface, lower cutting deck,
stop engine, engage parking brake and remove key
from the ignition switch.
2.
3.
tive battery cable first and then positive battery cable.
Remove battery from machine.
Raise and support seat and hood.
Remove battery cover and strap. Disconnect nega-
4.
Use a fuel transfer pump to remove fuel from the fuel
tank and into a suitable container.
5.
Disconnect electrical wiring from the fuel sender on
the fuel tank.
6.
hoses from elbow fittings in top of tank.
Disconnect fuelhosefromthestandpipe andventing
7.
tank covers to ROPS assembly. Remove tank covers.
Remove phillips head screws that secure two (2)
8.
Remove fuel tank using Figure 7 as a guide.
Groundsmaster 4100--D
Page 3 -- 9
Kubota Diesel Engine
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 30413, Toro Groundsmaster Groundsmaster 4100 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
At only 700mm wide the Mini Dumper is even at home on tight access
sites. No need to grunt, groan, and force the
mower about the yard. The US will be getting a revised 2011 Jeep Wrangler but the diesel option will not be offered in the United States.