Toro 08162SL Model 30413 Groundsmaster 4100 D Service Manual

Removal (Fig. 1)
Position machine on  a clean, level surface.  Lower
1.
cutting deck, stop engine, engage parking brake and re-
move key from the ignition switch.
2
1
NOTE:  Removal of clevis pins from deck and height--
of--cut chains is easier if deck is lifted slightly.
2.
height--of--cut chains to the rear of the cutting deck (Fig.
2).
Remove hairpins  and  clevis pins  that secure  the
3.
Remove hydraulic  motors  from cutting  deck (see
Figure 2
Cutting Deck Motor Removal in theService andRepairs
Section of Chapter 4 -- Hydraulic System). Position mo-
tors away from cutting deck.
1.
Hairpin and clevis pin
2.
Height--of--cut chain
1
4.
Remove hairpins and clevis pins that secure damp-
erstoliftarms(Fig.3).Rotatedampersandplaceoncut-
ting deck.
4
2
5.
Remove hydraulic  hoses from wing deck  lift cylin-
ders (Fig. 4):
A.  Remove deck  covers to  allow access  to  wing
deck lift cylinders.
3
B.  Thoroughly clean exterior of cylinder and fittings.
For assembly  purposes,  label hydraulic  hoses  to
show their correct position on the lift cylinder.
C. Disconnect  hydraulic hoses from  wing deck lift
cylinders. Cap hoses and fittings to preventcontami-
nation.
Figure 3
3.
4.
1.
2.
Lift arm
Castor arm
Support hub
Damper
6.
chine harness (Fig. 5).
Disconnect cutting deck wire harness from mainma-
6
160
to 180 ft--lb
6
(217 to 244 N--m)
1
7.
that secure support  hubs to cutting  deck castor arms
(Fig. 3).
Remove cap screws,  flat washers and flange nuts
5
4
8.
Slide the cutting deck away from the traction unit.
Installation (Fig. 1)
2
3
1.
arms, stop engine, engage parking brake and remove
key from the ignition switch.
Position machine on a clean, level surface. Lower lift
2.
3.
cure with cap screws, flat washers and flange nuts (Fig.
3). Torque flange nuts from 75 to 85 ft--lb (102 to 115
Position the cutting deck to the lift arms.
Alignsupporthubtocuttingdeckcastorarmsandse-
Figure 4
N--m).
1.
2.
3.
Wing deck lift cylinder
Flat washer
Lock nut
4.
5.
6.
Lock nut
Cap screw
Spacer
Groundsmaster 4100--D
Page 8 -- 7
Cutting Deck
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 298 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

One thought on “Toro 08162SL Model 30413 Groundsmaster 4100 D Service Manual

  1. At only 700mm wide the Mini Dumper is even at home on tight access
    sites. No need to grunt, groan, and force the
    mower about the yard. The US will be getting a revised 2011 Jeep Wrangler but the diesel option will not be offered in the United States.

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website