7.
8.
end face of the input shaft/pinion gear to the mating sur-
face of the bearing case. Subtract the “Design Cone
Center Distance” from this distance to determine initial
shim thickness (Fig. 32).
Secure the lock nut with the stake washer.
Use a depth gauge to measure the distance from the
0.040
in. (1.0 mm)
1
2
DESIGN CONE CENTER DISTANCE (distance
from mating surface of axle support to end face of
pinion gear):
1.870
+ 0.002 in. (47.5 + 0.05 mm)
NOTE: Bearing case shims are available in 0.004 in.
3
(0.1
mm) and 0.008 in. (0.2 mm) thickness.
9.
Coat new O-rings with grease and install the bearing
Figure 31
3.
caseinthegear case.Placeshims onthegear caseand
temporarily install gear case assembly into axle case.
Tighten mounting nuts and screws from 35 to 41 ft-lb
1.
2.
Oil seal
Bearing case
Seal garter spring
(47
to 56 N--m).
10.Insert
hold ring gear and measure the pinion gear to ring gear
backlash (Fig. 33).
a screwdriver through the drain plug hole to
1
Design
Cone Center
Distance
PINION GEAR TO RING GEAR BACKLASH:
0.004
to 0.016 in. (0.10 to 0.40 mm)
11.
Adjust backlash by increasing or reducing gear case
shim thickness.
2
12.Check
piniongeartoringgearengagement(seePin-
ion Gearto RingGear Engagement in thissection ofthis
manual).
Figure 32
13.Place
case. Tighten mounting nuts and screws from 35 to 41
ft-lb (47 to 56 N--m).
the correct combination of shims on the gear
1.
Input shaft/pinion gear
2.
Bearing case
14.Install
retaining rings and driven gear on input shaft/
pinion gear.
1
15.If
the drive gear (on drive motor shaft) was removed,
install the retaining rings and drive gear on the motor
shaft.
3
2
16.Use
a new gasket and install the cover plate.
4
Figure 33
3.
4.
1.
2.
Axle case
Screwdriver
Dial indicator
Input shaft/pinion gear
Groundsmaster 4100--D
Page 6 -- 25
Axles, Planetaries and Brakes
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 30413, Toro Groundsmaster Groundsmaster 4100 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
At only 700mm wide the Mini Dumper is even at home on tight access
sites. No need to grunt, groan, and force the
mower about the yard. The US will be getting a revised 2011 Jeep Wrangler but the diesel option will not be offered in the United States.