Wing Deck Position Switches
The wing deck position switches on the Groundsmaster
4100--D
are attached to the center deck housing (Fig.
53)
and are normally open. The wing deck position
switch is a powered proximity switch that incorporates
an internal reed switch and relay (see schematic in Fig-
ure 54). The actuator for the position switch is bolted to
the wing deck link (Fig. 55).
When a wing deck is lowered, the actuator tab on the
wing deck link is positioned close to the position switch
causing the switch to close. The closed switch allows
current flow to the wing deck hydraulic valve solenoid
and allows that wing deck to operate.
3
1
2
When a wing deck is raised, the actuator tab is moved
awayfromthepositionswitchandtheswitchopens.The
open switch prevents current flow to the wing deck hy-
draulicvalvesolenoidandkeepsthatwingdeckfromop-
erating.
Figure 53
1.
2.
Switch cover
Position switch
3.
Switch bracket
Testing
BLUE
WHITE
1.
and raise wing decks. Stop engine, engage parking
brake and remove key from the ignition switch.
Park machine on a level surface, lower cutting deck
BLACK
RED
2.
switch that requires testing. Disconnect switch from wir-
ing harness.
Remove switch cover from deck to allow access to
CONNECTOR
POSITION SWITCH
Figure 54
NOTE: Deck
Proximity
Switch
Adjustment
Tool
(TOR4095) can be used for switch testing and adjust-
ment.
1
0.188”
(4.8
mm)
3.
apply 12 VDC to switch connector terminal for red wire.
Ground switch connector terminal for black wire and
4.
minal for blue wire has 12 VDC and terminal for white
wire has 0 VDC.
Using a multimeter, verify that switch connector ter-
2
3
5.
Placeametalobjectnearsensing areaofswitch(op-
posite end from wires). Ground switch connector termi-
nal for black wire and apply 12 VDC to switch connector
terminal for red wire.
6.
minalforbluewirehas0VDCandterminalforwhitewire
has 12 VDC.
Using a multimeter, verify that switch connector ter-
Figure 55
3.
1.
2.
Position switch
Actuator tab
Wing deck link
7.
procedure, see Wing Deck Position Switches in the Ad-
justments section of this chapter.
Replace switch as needed. For switch adjustment
8.
Install switch cover to deck.
Electrical System
Page 5 -- 34
Groundsmaster 4100--D
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 30413, Toro Groundsmaster Groundsmaster 4100 D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
At only 700mm wide the Mini Dumper is even at home on tight access
sites. No need to grunt, groan, and force the
mower about the yard. The US will be getting a revised 2011 Jeep Wrangler but the diesel option will not be offered in the United States.