Drive Belt Tension Adjustment
1.
Park mower on a level surface. Make sure engine
is OFF. Remove high tension lead from the spark plug.
2.
Loosen both set screws in the clutch knob. Remove
clutch knob and poly washer from the clutch assembly.
3.
Remove three socket head cap screws and lock
washers, then remove belt cover.
5
4.
Check drive belt tension as follows:
4
A. Apply 5 to 10 lb (22 to 44 N) of force on the drive
belt midway between the driver pulley and driven
pulley.
B. Drive belt deflection should be about 0.25 inch
(6.4
mm).
2
1
3
5
to 10 lbf
C. If belt tension is not acceptable, loosen the sock-
et head cap screw on the idler block.
(22 to 44 N)
Figure 4
D. Pivot idler to get proper tension on the drive belt.
Tighten the socket head cap screw.
1.
2.
3.
Drive belt
Driver pulley
Driven pulley
4.
5.
Socket head cap screw
Idler pulley
E. Verify drive belt tension and readjust it as neces-
sary. Torque the socket head cap screw from 7 to 10
ft–lb (1.0 to 1.4 kg–m).
5.
Secure belt cover to housing with three socket head
cap screws and lock washers.
6.
Reinstall poly washer and clutch knob to the clutch
assembly. Tighten both set screws in the clutch knob.
Greensmaster 1000
Page 8 – 7
Grooming Reel Kit
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Greensmaster 1000, Toro Greensmaster 1600, Toro Greensmaster 96889SL |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)