Note:
The lock nut turns hard on the spindle shaft
5. Secure drum spindle to the drum with four cap
screwsandlockwashers.Tightenscrewsusinganalter-
nating pattern. Repeat tightening sequence a second
time.
when tightened. Make sure all rotation has stopped
when tightening. A good solid sound indicates the nut is
tight.
3.
fully slide drum spindle into drum hub bearings. Secure
lock nut and seal spacer to the drum spindle (Fig. 25).
Apply grease to the shaft of the drum spindle. Care-
6. Secure drum shaft to each drum with four cap
screws and lock washers. Make sure shafts are seated
properly. Tighten screws using an alternating pattern.
Note:
The fit between the drum hub and drum is a
Installation
close tolerance and can be easily jammed. The hub can
be rotated when seated properly in the bore of the drum.
1.
is OFF. Remove high tension lead from the spark plug.
Park mower on a level surface. Make sure engine
4.
and lock washers. Tighten screws using an alternating
pattern. Repeat tightening sequence a second time.
Secure drum hub to the drum with four cap screws
2.
der the mower to accept drum shaft bearings. Pivot
mower back down.
Pivot mower back and position drum assembly un-
3.
Replace both drum shaft bearings to both drum
shafts (see Drum Shaft Bearing Installation).
Greensmaster 1000/1600
Page 4 – 17
Traction and Reel Drive Systems
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Greensmaster 1000, Toro Greensmaster 1600, Toro Greensmaster 96889SL |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)