Toro 96889SL Rev A Service Manual Greensmaster 1000 1600 Preface Publication

3.
(Fig. 33).
Reassemble  bearing  housing  (LH)   components
6.   Attach bearing housing (LH) through the frame onto
the reel shaft (Fig. 33).
A.  Place small seal  into the bearing housing  with
the flat side out.
A.  Push housing onto reel shaft. If  necessary, tap
into position with a soft hammer.
B.  Press new bearing into the bearing housing with
a bearing driver.
B.  Make sure grease fitting hole is positioned to the
front of the mower.
C. Place large seal on the bearing housing with the
flat side out. Press seal in with a seal driver.
7.   Secure cutting reel from turning with a block of hard
wood. Tighten lock nut to the cutting reel shaft (Fig. 33).
Torque lock nut to 50 ft–lb (6.9 kg–m).
4.
Position reel in frame  to accept bearing housings.
The reel shaft end with internal threads should be on the
right side of the frame.
8.   Reinstall  grease fittings to both  bearing housings.
Lubricate both housings with No. 2 multipurpose lithium
base grease (Fig. 32 and 33).
Note:
The two bearing housings are similar in appear-
ance but can not be interchanged. The bearing housing
(RH) was marked prior to removal.
9.   Reinstall bedbar to the mower (see Bedbar Installa-
tion in the Service and  Repairs section of Chapter 7 –
Cutting Unit).
5.
Attachbearinghousing(RH)throughtheframeonto
the reel shaft (Fig. 32).
10. Reinstall grooming reel kit following the Installation
instructions in Frame Assemblies (RH and LH).
A.  Push housing onto reel shaft. If  necessary, tap
into position with a soft hammer.
B.  Make sure grease fitting hole is positioned to the
front of the mower.
Lubrication
Therearetwogroomingreelshaftbearingsoneachend
of the mower.
1.
Park mower on a level  surface. Make sure engine
is OFF. Remove high tension lead from the spark plug.
2.
Use a hand pump grease gun  and No. 2 multipur-
pose lithium base grease for lubrication.
3.
Pump only a maximum of 2 to 3 pumps of grease to
avoid permanently damaging the grease seals.
Figure 34
Greensmaster 1000
Page 8 – 21
Grooming Reel Kit
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 140 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website