10.
eration; see Component Testing in Chapter 5 – Electri-
cal System. Replace malfunctioning switches before
Checkthesafetyinterlockswitchdailyforproperop-
operating machine. (After every two years, replace the
interlock switch in the safety system, whether it is work-
ing properly or not.)
While Operating
11.
equate ventilation. Exhaust fumes are hazardous and
could be deadly.
Do not run the engine in a confined area without ad-
15. Before beginning mowing operation:
A. Stop engine.
B. Disengage traction drive.
C. Remove transport wheels.
D. Engage reel drive lever.
12.
operating the machine.
Always stand behind the handles when starting and
13.
To start and stop the engine:
A. Open fuel shut-off valve.
16.
Before emptying basket of clippings, disengage
traction drive, reduce engine speed and move on/off
switch to off position.
B. Verify that the traction drive lever on handle is in
NEUTRAL position and reel drive lever on mower is
DISENGAGED.
17.
Do not touch engine, muffler or exhaust pipe while
engine is running or soon after it has stopped because
these areas are hot enough to cause burns.
C. Move on/off switch to ON position, set choke to
full choke position (cold start) and throttle to half
throttle.
18.
If the cutting unit strikes a solid object or vibrates ab-
normally, stop immediately, turn engine off,wait for all
motion to stop and inspect for damage. A damaged reel
or bedknife must be repaired or replaced before opera-
tion is commenced.
D. Pull starter cord to start engine.
E. Move throttle to SLOW and on/off switch to OFF
position to stop engine.
14.
To transport mower from one area to another:
A. Install transport wheels.
B. Disengage reel drive lever.
C. Start engine.
19. Whenever machine is left unattended, be sure en-
gine is stopped and cutting unit reel is not spinning.
Close fuel shut-off valve if machine is not to be used for
an extended period of time.
D. Press down on handle to raise front of mower
and engage traction drive.
Maintenance and Service
20.
chine, stop the engine and pull the spark plug wire off
spark plug to prevent accidental starting of the engine.
Before servicing or making adjustments to the ma-
25. Do not overspeed the engine by changing governor
settings. Maximum engine speed is 3600 rpm. To as-
sure safety and accuracy, have an Authorized Toro Dis-
tributor
tachometer.
check maximum engine speed with a
21.
keep all nuts, bolts, screws and belts properly tightened.
To make sure entire machine is in good condition,
26.
ding oil to the crankcase.
Engine must be shut off before checking oil or ad-
22.
quired, contact an Authorized TORO Distributor.
If major repairs are ever needed or assistance is re-
27.
To be sure of optimum performance and safety, al-
23.
area free of excessive grease, grass, leaves and accu-
mulation of dirt.
To reduce potential fire hazard, keep the engine
ways purchase genuine TORO replacement parts and
accessories. Replacement parts and accessories made
by other manufacturers could be dangerous. Such use
could void the product warranty of The Toro Company.
24.
If the engine must be running to perform a mainte-
nance adjustment, keep hands, feet, clothing, and any
parts of the body away from the cutting unit and any
moving parts. Keep everyone away.
Safety
Greensmaster 1000/1600
Page 1 – 2
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 1000, Toro Greensmaster 1600, Toro Greensmaster 96889SL |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)