Removal
1.
Makesuremachineisparkedonalevelsurfacewith
the engine OFF. Remove high tension lead from the
spark plug to prevent the engine from starting. Close
fuel shut–off valve.
2.
Remove pulley V–belts (Fig. 12).
2
A. Make sure clutch is DISENGAGED so the V–
belts (34)areslackened.Makesureservicebrakeis
DISENGAGED so the input shaft pulley can turn.
1
B. Open bellcrank cover (1) on the counter shaft
housing to get access to the clutch. Remove V–
belts one at a time by sliding the belt off the idler
pulley (39) first.
Figure 13
1.
Lower jam nut
2.
Clutch bracket
3.
Remove clutch cable (Fig. 12).
A. Remove shoulder bolt (13) and lock nut (37)
from the clutch cable eyelet (49) and lever (9).
2
SLOW
B. Loosen lower jam nut holding the clutch cable to
the clutch bracket. Remove clutch cable from the
clutch bracket and clear of engine (Fig. 13).
1
3
4.
Remove throttle cable from engine.
4
A. Loosen screw on governor lever enough to slide
the throttle cable out of the nut (Fig. 14).
5
B. Remove cap screw (23), flat washers (7), and
lock nut (26) from the engine base (49) and throttle
cable bracket (24). Pull throttle cable (47) and
bracket clear of the engine (Fig. 12).
Figure 14
1.
2.
3.
Screw
Governor lever
Throttle cable
4.
5.
Nut
Washer head screw
5.
Remove engine from the engine base.
A. Scribe a mark on the engine base at the bottom
of the engine for reassembly purposes (Fig. 15).
B. Disconnect both black\white wires on the clutch
switch (16) from both brown wires.
1
C. Remove remaining cap screws (23), flat wash-
ers(7),andlocknuts(26)fromtheenginebase(49).
Remove the engine from the cutting unit.
SCRIBE MARK
2
6.
The bellcrank assembly can be removed from the
engine with minimum disassembly (Fig. 12).
A. Remove cap screw (36), lock washer (33), and
washer (35) from the engine shaft. Remove pulley
Figure 15
2.
1.
Engine block
Engine base
(11),
key, and spacer (12) from the engine shaft.
C. Remove complete bellcrank assembly from the
engine.
B. Remove five cap screws (20) and lock washers
(33)
(17)
securing the belt shield (29) and clutch bracket
to the engine block.
Greensmaster 1000/1600
Page 3 – 11
Engine
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 1000, Toro Greensmaster 1600, Toro Greensmaster 96889SL |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)