7.
Install frame assembly (RH) onto the right reel bear-
ing housing using the following procedure (Fig. 27):
FRAME ASSEMBLY (RH)
2
A. Slide bearing housing of frame assembly (RH)
over the end of the grooming reel shaft (Fig. 28)
1
B. Insert adapter ring (9) into the reel bearing hous-
ing (Fig 17).
C. Insertbothflatheadscrewsthroughthegroomer
arm cover and adapter. Put a spacer over each
screw before placing the adapter into the reel bear-
ing housing (Fig. 28 and 29).
Figure 27
1.
Bearing
2.
Bearing housing
D. Slide adapter through the bearing and into the
reel bearing housing. Install lock nuts on flat head
screws and torque from 23 to 27 ft–lb (3.2 to 3.7
kg–m) (Fig. 28 and 29).
1
2
Note:
The lock nut (1) has left handed threads.
3
4
E. Secure the grooming reel shaft (53) to the bear-
ing housing (4) with lock nut (1). Torque lock nut
from 29 to 35 ft–lb (4.0 to 4.8 kg–m) (Fig 17).
8.
Secure mounting block (22) to the frame with cap
screw (11) and belleville washer (12) (Fig. 17 and 29).
5
6
9.
with cap screws and washers previously removed (Fig.
28).
Reinstall bedbar adjuster frame to the mower frame
Figure 28
1.
2.
3.
Bedbar adjuster frame
Cap screw and washer
Side plate
4.
5.
6.
Groomer adjuster
Bearing housing
Grooming reel shaft
IMPORTANT: If the clutch assembly was disas-
sembled, make sure it is reassembled properly (see
Clutch Assembly Reassembly).
1
10.
and belt drive housing by following the instructions in
Clutch Assembly Reinstallation (Fig. 30).
Complete the reinstallation of the clutch assembly
2
3
6
4
7
8
5
11.
Use a 1/2–inch drive ratchet and extension to rein-
stall drive pulley and reel drive belt to cutting reel shaft.
Torque drive pulley from 40 to 60 ft–lb (5.5 to 8.3 kg–m)
(Fig. 29).
Figure 29
12.
On newer models, tighten reel drive belt as follows:
1.
2.
3.
4.
Reel idler bracket
Idler pulley assembly
Reel drive belt
5.
Groomer arm cover
Mounting block
Drive pulley
6.
7.
8.
A. Pivot idler pulley clockwise (opposite arrow
direction) to tighten reel drive belt. Tighten belt from
Flat head screw
Reel drive belt
20
to 25 lb (89 to 111 N) of force. Tighten cap screw
on clutch housing. (Fig. 21).
B. Raise grass shield to 4 inches from the top of the
support rod. Tighten both cap screws and lock nuts
securing the shield to the frame (Fig. 20).
3
1
13.
On older model, pivot idler pulley assembly against
the reel drive belt. Apply 20 to 25 lb (89 to 111 N) of force
to the idler pulley. Tighten both carriage bolts securing
the reel idler bracket to the frame (Fig. 29).
2
Figure 30
1.
2.
Drive belt
Driven pulley
3.
Clutch drive housing
Grooming Reel Kit
Page 8 – 18
Greensmaster 1000
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 1000, Toro Greensmaster 1600, Toro Greensmaster 96889SL |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)