Disassembly
6. Secure belt cover to housing with three socket head
cap screws and washers (Fig. 7). Reinstall poly washer
and clutch knob to clutch assembly. Tighten both set
screws into the clutch knob (Fig. 6).
Inspect grooming reel blades frequently for damage and
wear.Straightenbentbladeswithapliers.Eitherreplace
worn blades or reverse the grooming reel shaft to put the
sharpest blade edge forward (Fig. 8).
2
1.
Remove one lock nut from either end of the shaft
(Fig. 9).
3
2.
Remove spacers and blades as necessary.
Reassembly
1
1.
Startplacingtwospacersagainstthelocknut.Then,
place blade against spacers (Fig. 9).
4
2.
Rotate location mark on each blade one flat of the
shaft, either in a clockwise or counterclockwise direc-
tion. The direction of rotation must remain constant on
the shaft (Fig. 8).
5
ROTATION
Figure 8
3.
blade. Blades and spacers should be centered on the
shaft (Fig. 9).
Make sure there are two spacers between each
1.
2.
3.
Dull rounded edge
Sharp pointed edge
Grooming blade
4.
5.
Location mark
Shaft
4.
Screw lock nut on the shaft and torque both lock
nuts from 200 to 250 ft–lb (27.7 to 34.6 kg–m) so
spacers are not free to rotate.
CENTER BLADES
Installation
Note:
The driven pulley (42) has left handed threads.
1.
Park mower on a level surface. Make sure engine
is OFF. Remove high tension lead from the spark plug.
1
2
2.
housing (46). Screw driven pulley (41) on the shaft. Do
not tighten (Fig. 5).
Place grooming reel shaft (53) into the belt drive
3
4
Figure 9
1.
2.
Lock nut
Shaft
3.
4.
Spacer
Blade
3.
(Fig. 5):
Fromtherightsideofthemower,installthefollowing
A. Install bearing housing (4) onto the other end of
the shaft (53) and side plate (8).
B. Secure the bearing housing to the side plate with
three flat head socket screws (50) and lock nuts (3).
C. Secure lock nut (1) to the shaft.
1
4.
(42)
While holding the lock nut (1), tighten driven pulley
to the shaft (53) (Fig. 5).
3
2
5.
Reinstall drive belt onto the driven pulley. Adjust
drivebelttension(seeDriveBeltTensioninAdjustments
section) and torque socket head cap screw from 7 to 10
ft–lb (1.0 to 1.4 kg–m) (Fig. 10).
Figure 10
1.
2.
Drive belt
Driven pulley
3.
Socket head cap screw
Grooming Reel Kit
Page 8 – 10
Greensmaster 1000
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 1000, Toro Greensmaster 1600, Toro Greensmaster 96889SL |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)