Differential Axle Bearing (Countershaft Housing)
Removal
1.
Park mower on a level surface. Make sure engine
is OFF. Remove high tension lead from the spark plug.
3
5
2.
Lower handle to allow a clearance for the removal
4
6
of the bearing and flangettes from the differential axle
(see Handle in the Adjustments section of Chapter 6 –
Wheels and Accessories).
2
Note:
The locking collar securing the left differential
axle to the countershaft housing is a eccentric flange
type.
1
3.
collarbystrikingitwithapunchintheclockwisedirection
(Fig. 38).
Loosen the set screw on the locking collar. Unlock
Figure 37
1.
2.
3.
Locking collar
4.
5.
Flangettes
Cap screw
Lock washer
Differential axle (LH)
Jam nut & lock washer
6.
4.
Remove bearing housing on the side plate for the
left differential axle (see Differential Axle Pulley and
Bearing Removal).
5.
6.
Slide locking collar off the differential axle.
Removejamnuts(13),lockwashers(12),andcable
clip (15) from the studs of screw plate (5) (Fig. 33).
IMPORTANT: Before removing the flangettes and
bearing from the differential housing, support the
axle in its original position to prevent possible dam-
age to the remaining differential axle bearing.
2
1
CLOCKWISE
7.
ferential axle (Fig. 33).
Slide flangettes (6 and 8) and bearing (9) of the dif-
Figure 38
1.
Differential axle (LH)
2. Locking collar
Installation
1.
Park mower on a level surface. Make sure engine
is OFF. Remove high tension lead from the spark plug.
2.
Stack flangette (8), bearing (9), and flangette (6) to-
gether. Make sure lock collar on the bearing is posi-
tioned towards the flangette with the grease fitting (7)
(Fig. 33).
Note:
Before tightening jam nuts (13), make sure that
thedifferentialaxlesturnfreelyandarealigned(Fig.33).
3.
Slide flangettes (6 and 8) and bearing (9) over the
differential axle. Secure assembly and cable clip (15) to
the studs of screw plate (5) with the jam nuts (13) and
lock washers (12) (Fig. 33).
4.
Slide collar onto the differential axle. Lock collar by
striking it with a punch in the counterclockwise direction.
Tighten set screw on the locking collar (Fig. 38).
5.
Reinstall bearing housing for the left differential
axle (see Differential Axle Pulley and Bearing).
Greensmaster 1000/1600
Page 4 – 23
Traction and Reel Drive Systems
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 1000, Toro Greensmaster 1600, Toro Greensmaster 96889SL |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)