Toro 96889SL Rev A Service Manual Greensmaster 1000 1600 Preface Publication

Reel Drive Belt Replacement
Removal
3.   Adjust reel drive belt tension and reinstall reel drive
cover (see Reel Drive Belt in the Adjustments section).
1.
Park mower on a level  surface. Make sure engine
is OFF. Remove high tension lead from the spark plug.
4.   Reinstall  grass shield  to shield brackets  with cap
screws, flat washers, and lock nuts (Fig. 8).
2.
Remove cap  screws (56),  washers (57)  and reel
drive cover (49) to expose reel drive belt (41) (Fig. 11).
3.
ing grass shield to shield brackets. Move grass shield to
access the cap screw securing the idler pulley (Fig. 8).
Remove cap screws, flat washers, and nuts secur-
3
1
4.
Loosen cap screw  (2) securing the pulley support
spacer (58) (Fig. 11).
5.
Pivot idler pulley  counterclockwise away from  the
reel drive belt to loosen belt tension. Remove reel drive
belt from the clutch pulley and drive pulley (Fig. 12).
2
4
Installation
1.
Park mower on a level  surface. Make sure engine
is OFF. Remove high tension lead from the spark plug.
Figure 12
2.
drive pulley (Fig. 12).
Placeanewreeldrivebeltontotheclutchpulleyand
1.
2.
Idler pulley
Reel drive belt
3.
4.
Clutch pulley
Drive pulley
Reel Drive Idler Pulley and Bearing
Removal
Installation
1.
(see Reel Drive Belt Replacement Removal).
Remove reel drive belt from the reel drive assembly
1.   Make  sure  engine is  OFF. Remove  high  tension
lead from the spark plug. Park mower on a level surface.
2.
the pulley support spacer (58). Remove idler pulley as-
sembly from the clutch housing (Fig. 11).
Remove cap screw (2)  and lock washer (47) from
1.   Position cap screw (2) with lock washer (47) into the
clutch housing (1). Start cap  screw into pulley support
spacer (58) of the idler assembly until lock washer just
starts to compress. Do not over tighten (Fig. 11).
Disassembly (Fig. 13)
2.
(see Reel Drive Belt Installation).
Reinstall reel drive belt  to the reel drive assembly
Note:
and drum drive assemblies are identical.
The idler  pulley assemblies  for the  reel drive
4
5
1.
from the pulley support spacer. Pull spacer from the idler
pulley.
Remove cap  screw, lock washer,  and flat washer
2.
pulley.
Remove snap ring. Pull ball  bearing from the idler
7
6
3
Assembly (Fig. 13)
1.
pulley  support spacer  into the  ball  bearing and  idler
pulley.
Press new ball  bearing into the idler pulley.  Press
1
2
Figure 13
1.
2.
3.
4.
Cap screw
Lock washer
Flat washer
Pulley support spacer
5.
6.
7.
Idler pulley
Snap ring
Ball bearing
2.
lock  washer, and  cap  screw  into  the pulley  support
spacer.
Install snap ring into idler pulley. Secure flat washer,
Greensmaster 1000/1600
Page 4 – 9
Traction and Reel Drive Systems
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 140 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website