15.
from the adapter (Fig. 25).
Use allen wrench to remove flat head socketscrews
5
16.
Remove adapter (6), bearing (7), both spacers (5)
from the belt drive housing (46) (Fig. 17).
4
17.
Pull belt drive housing with the groomer adjuster
from the reel bearing housing (Fig. 25).
7
1
8
2
6
3
18.
Remove adapter ring (9) and both slot covers (54)
from the reel bearing housing (Fig. 17).
19.
If removing the cutting reel, see Cutting Reel Re-
moval in this section..
10
9
1
2
Installation
Figure 25
1.
is OFF. Remove high tension lead from the spark plug.
Park mower on a level surface. Make sure engine
1.
2.
3.
4.
5.
Flat head socket screw
Adapter
Belt drive housing
Groomer adjuster
Bedbar adjuster frame
6.
7.
8.
9.
Adapter ring
Reel bearing housing
Spacer
2.
remove the following on both sides of the mower frame
(Fig. 25):
If bedbar adjuster frames have not been removed,
Reel bearing lock nut
10. Driven pulley (removed)
FRAME ASSEMBLY (LH)
10
A. Use spring compressor or clamp to compress
springs in bedbar adjuster frames to free the bedbar
adjuster from the bedbar ear.
7
1
11
3
6
B. Remove both cap screws and washers securing
the bedbar adjuster frame to the mower frame.
12
9
4
3.
mower frame (Fig. 25 and 26).
Install frame assembly (LH) to the left side of the
A. If removed, press new bearing into belt drive
housing.
8
2
1
5
B. Insert adapter ring into the reel bearing housing.
C. Insert both flat head socket screws through the
adapter. Position spacers on the screws.
Figure 26
1.
2.
3.
4.
5.
6.
Bearing
Adapter ring
Reel bearing housing
Flat head socket screws
Adapter
7.
8.
9.
10. Mounting block
11. Cap screw
12. Belleville washer
Belt drive housing
Slot cover
Lock nuts
D. Align adapter, spacers, and flat head socket
screws with the slots in the belt drive housing. Slide
adapter through the bearing, then slide the screws
through the slots in the housing.
Spacers
E. Insert a slot cover onto each flat head socket
screw while aligning the curved side of the cover
with the curve of the belt drive cover. Covers should
curve away from the housing.
4.
Place one end of shaft (53) into the bearing support
of the belt drive housing (46). Mount driven pulley (41)
to the shaft. Torque pulley from 29 to 35 ft–lb (4.0 to 4.8
kg–m) using a 3/8–inch allen socket on the torque
wrench (Fig. 17).
Note:
Itmaybenecessarytomoveorremovethebed-
bar tho gain access to the lock nuts.
5.
Secure mounting block to the frame with cap screw
and belleville washer (Fig. 26).
F. Slide flat head socket screws through the reel
bearing housing. Screw lock nuts on both screws.
Torque screws from 23 to 27 ft–lb (3.2 to 3.7 kg–m).
6.
Reinstall bedbar adjuster frame to mower frame
with cap screws and washers previously removed (Fig.
25).
Note:
The driven pulley (42) has left handed threads.
Greensmaster 1000
Page 8 – 17
Grooming Reel Kit
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 1000, Toro Greensmaster 1600, Toro Greensmaster 96889SL |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)