Clutch Cable Replacement
Removal
6
1.
Park mower on a level surface. Make sure engine
is OFF. Remove high tension lead from the spark plug.
2.
cable. Remove cable ties from the right side of the han-
dle.
Disengage clutch to release tension on the clutch
5
1
2
3.
Remove clutch cable from the bellcrank assembly
4
as follows (Fig. 7):
3
A. Open bellcrank cover to access the clutch lever
and bracket.
Figure 7
B. Remove shoulder bolt and lock nut securing the
cable eyelet to the clutch lever.
1.
2.
3.
Clutch lever
Clutch bracket
Shoulder bolt & lock nut
4.
5.
6.
Cable eyelet
Rear nut
Clutch cable
C. Loosen rear nut attaching the clutch cable to the
clutch bracket. Remove clutch cable from the clutch
bracket.
4.
gaged so the console (29) can be positioned to access
the clutch lever (25) and clutch cable (12) (Fig. 2).
Make sure brake is disengaged and the clutch is en-
5
4
3
5.
Remove four screws (13) securing the console (29)
to the console brackets (10 and 19). Position console
forward and away from the brackets (Fig. 2).
6
Note:
On models without the operator presence kit,
the bail assembly is not installed on the handle assem-
bly. The shoulder bolt and spacer are substituted by an
additional screw on both sides of the handle assembly
(Fig. 2 and 8).
1
2
Figure 8
6.
Gain access to the clutch lever and clutch cable as
follows (Fig. 8):
1.
2.
3.
Screw
Console bracket
Shoulder bolt
4.
5.
6.
Spacer
Bail assembly
Clutch skid bracket
A. If the operator presence kit is installed, remove
both screws from clutch skid bracket. Remove
shoulderboltandspacerfromthebailassemblyand
clutch skid bracket. Remove console bracket from
the clutch skid bracket.
Installation
1.
Secure clutch cable (12) eyelet to the clutch lever
with the shoulder bolt (14) and lock nut (11) (Fig. 2).
(25)
B. If the operator presence kit is not installed, re-
move three screws and console bracket from the
clutch skid bracket.
Note:
On models without the operator presence kit,
the bail assembly is not installed on the handle assem-
bly. The shoulder bolt and spacer are substituted by an
additional screw on both sides of the handle assembly
(Fig. 2 and 8).
7.
Remove shoulder bolt (14) and lock nut (11) from
the clutch lever (25) and clutch cable (12) eyelet (Fig. 2).
2.
If the operator presence kit is installed, reinstall con-
8.
clutch bracket (27). Remove cable from the clutch
bracket (Fig. 2).
Loosen nut securing the clutch cable (12) to the
sole bracket to the clutch skid bracket. Secure brackets
with both screws. Secure bail assembly and spacer to
the clutch skid bracket with the shoulder bolt (Fig. 8).
9.
Remove clutch cable from the mower.
Wheels and Accessories
Greensmaster 1000/1600
Page 6 – 8
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 1000, Toro Greensmaster 1600, Toro Greensmaster 96889SL |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)