Throttle Cable Replacement
Removal
2
1.
Park mower on a level surface. Make sure engine
is OFF. Remove high tension lead from the spark plug.
4
3
2.
Remove cable ties from the right side of the handle.
Remove nut and cable clip from the flangette on the
countershaft housing.
6
1
3.
Remove throttle cable from the governor as follows
(Fig. 9):
5
A. Unscrew throttle cable screw enough to release
the throttle cable from the nut in the governor lever.
Figure 9
B. Remove hex head screw from the throttle cable
bracket.
1.
2.
3.
Throttle cable screw
Throttle cable
Nut
4.
5.
6.
Governor lever
Hex head screw
Throttle cable bracket
C. Pull throttle cable clear of the nut in the governor
lever.
4.
gaged so the console (29) can be positioned to access
the throttle lever (6) and throttle cable (1) (Fig. 2).
Make sure brake is disengaged and the clutch is en-
5
4
3
5.
Remove four screws (13) securing the console (29)
to the console brackets (10 and 19). Position console
forward and away from the brackets (Fig. 2).
6.
Gain access to the throttle lever and throttle cable
6
as follows (Fig. 10):
1
2
A. Remove both screws from clutch skid bracket.
B. Remove shoulder bolt and spacer from the bail
assembly and clutch skid bracket. Remove console
bracket from the clutch skid bracket.
Figure 10
1.
2.
3.
Screw
Console bracket
Shoulder bolt
4.
5.
6.
Spacer
Bail assembly
Clutch skid bracket
7.
(8).
Snap throttle cable (1) out of the clutch skid bracket
Disconnect throttle cable from the throttle lever (6)
(Fig. 2).
4.
(10
Position console (29) over both console brackets
and 19). Secure console to the brackets with four
screws (13) (Fig. 2).
8.
Remove clutch cable from the mower.
5.
new cable to the governor lever as follows (Fig. 9).
Run new throttle cable to the governor lever. Install
Installation
1.
Snap throttle cable to the clutch skid bracket (8) (Fig. 2).
Connect throttle cable (1) to the throttle lever (6).
A. Insert throttle cable into the nut.
B. Tighten throttle cable screw to hold cable in the
nut and governor lever. Do not tighten screw.
2.
Secure brackets with both screws (Fig. 10).
Reinstall console bracket to the clutch skid bracket.
6.
Secure throttle cable to the flangette on the countershaft
housing with the cable clip and nut.
Install new cable ties to the right side of the handle.
3.
bracket with the shoulder bolt (Fig. 10).
Secure bail assembly and spacer to the clutch skid
7.
Adjust throttle cable (see Throttle Linkage Adjust-
ment in Chapter 3 – Engine).
Wheels and Accessories
Greensmaster 1000/1600
Page 6 – 10
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 1000, Toro Greensmaster 1600, Toro Greensmaster 96889SL |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)