Adjustments
Adjust Traction Drive for Neutral
If the machine creeps when the traction pedal is in the
neutral position, the traction adjustment cam needs ad-
justment.
4. Start engine and rotate cam hex in both directions to
determine mid position of neutral span. When properly
set, neither wheel that is off the floor should turn.
1.
Park the machine on a level surface and turn the en-
5. Tighten locknut to secure adjustment.
gine off.
6.
7.
the ground. Test drive the machine to make sure it does
notmovewhenintheneutralposition.Readjustifneces-
sary.
Stop engine.
Remove support blocks and lower the machine to
WARNING
One front wheel and rear wheel must be raised
off the ground or the machine will move during
adjustment. Make sure machine is supported
so it will not accidentally fall injuring anyone
under machine.
2.
Raise one front wheel and rear wheel off floor and
place support blocks under frame.
3.
Loosen locknut on traction adjustment cam.
WARNING
Engine must be running so final adjustment of
thetractionadjustmentcamcanbeperformed.
To guard against possible personal injury,
keep hands, feet, face and other parts of the
body away from the muffler, other hot parts of
the engine, and any rotating parts.
1
2
Figure 35
1.
Adjustment cam
2.
Lock nut
Hydraulic System (Rev. D)
Page 4 -- 54
Groundsmaster 3500--D
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3500 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |