Toro 01088SL Rev F Service Manual Groundsmaster 3500 D Preface Publication

Lubrication
Traction Unit
CAUTION
Before servicing or  making adjustments to the
machine, stop  engine, lower  cutting units,  set
parking brake, and remove key from the ignition
switch.
Figure 1
The traction unit has grease fittings that must be lubri-
cated  regularly with  No. 2  General  Purpose Lithium
Base  Grease. If  machine  is operated  under  normal
conditions, lubricate bearings and bushings after every
50
hours of operation. Bearings and bushings must be
lubricated daily when operating conditions are extreme-
ly dusty and dirty. Dusty and dirty operating conditions
could cause dirt to get into the bearings and bushings,
resulting in accelerated  wear. Lubricate bearings  and
bushings immediately after every washing, regardless
of the interval listed.
The traction unit bearings and bushings that must be lu-
bricated  are: Rear  cutting  unit  pivot (Fig.  NO TAG),
Frontcuttingunitpivot(Fig.2),Sidewindercylinderends
(qty.2) (Fig. 3),Steering pivot (Fig. 4),Rear liftarm pivot
and lift cylinder (qty. 2) (Fig. 5), Left front  lift arm pivot
and lift cylinder (qty. 2) (Fig. 6), Right front lift arm pivot
and lift cylinder (qty. 2) (Fig. 7), Neutral adjust mecha-
nism (Fig. 8), Mow/Transport slide (Fig. 9), Belt tension
pivot (Fig. 10), and Steering cylinder (Fig. 11).
Figure 2
Note:
If desired, an additional  grease fitting may be
installed in other end of steering cylinder. Tire must be
removed, plug removed, fitting installed, greased, fitting
removed and plug reinstalled (Fig. 12).
2
IMPORTANT: Do  not  lubricate  Sidewinder   cross
tube: bearing blocks are self lubricated.
IMPORTANT: Lubricate bearings and bushings im-
mediately after washing. This helps to purge water
out of bearings and increases bearing life.
1.
Wipe each grease fitting with a clean rag.
Figure 3
IMPORTANT: Do  not apply  too much  pressure or
grease seals will be permanently damaged.
2.
3.
Apply grease until pressure is felt against handle.
Wipe excess grease away.
Groundsmaster 3500--D
Product Records and Maintenance
Page 2 -- 7
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 256 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website