Toro 01088SL Rev F Service Manual Groundsmaster 3500 D Preface Publication

Removal
Installation
1.
stop engine,  engage parking  brake, and remove  key
from the ignition switch.
Park machine on a level surface, lower cutting units,
1.  Position rear fork through the frame.
2.
Install lock washer, thrust washer, and cap screw to
the rear fork shaft. Torque cap screw from 60 to 80 ft--lb
(81 to 108 N--m). Make sure fork turns freely.
2.
Remove hood from the machine (see Hood Remov-
al).
3.
Install hydraulic motor to the rear fork. Secure motor
to the fork with four  hex socket head screws and lock
nuts.
WARNING
4.
Secure hydraulic cylinder to the rear fork as follows:
A.  Swing cylinder to the rear fork.
Beforejackingupthemachine,reviewandfollow
Jacking Instructions in Chapter 1 -- Safety.
B.  Install ball joint to rear fork.
3.
Jack up rear wheel enough to allow the removal of
the rear fork.
C. Secure  ball joint to  the rear fork  with both  jam
nuts.Tightenthefirstjamnutfrom65to85ft--lb(88to
4.
Remove lug nuts from drive studs. Remove tire and
115
N--m), then tighten  the second jam  nut to the
wheel rim from wheel hub.
same specification.
5.
lows:
Separate hydraulic cylinder from the rear fork as fol-
5.
Torque nuts from 45 to 65 ft--lb (61 to 88 N--m).
Secure wheel rim to the wheel hub with four lug nuts.
A.  Remove both jam nuts securing the ball joint to
the rear fork.
6.
Lower rear wheel to the ground.
B.  Separate ball joint from the rear fork.
C. Swing cylinder clear of the rear fork.
Remove four lock nuts and hex socket head screws
6.
securing the hydraulic motor to the  rear fork. Remove
motor from the fork and position it away from the fork.
CAUTION
Support rear fork to prevent its falling during re-
moval and installation. Personal  injury or dam-
age to  the fork may  result from improper  han-
dling.
7.
Remove cap screw, thrust washer, and lock washer
from the rear fork shaft.
8.
9.
Lower rear fork from machine.
Check bushings  for wear and damage.  Replace if
necessary.
Groundsmaster 3500--D
Page 6 -- 13     Rev. D
Wheels, Brakes,and Chassis
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 256 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website