Removal (Fig. 47)
Note:
Note position of hydraulic hoses when remov-
3
ing from the rotary motors. Proper positioning is critical
whenreconnecting hydraulic hoses.The inlettothemo-
tor is opposite from the relief valve (Fig. 48).
1.
to the cutting unit (Fig. 48). Remove hydraulic motor
from deck and o--ring from top of spindle housing.
Remove two cap screws thatsecure hydraulic motor
4
2
2.
Remove hydraulic hoses from rotary motors using
Figure 47 as a guide.
1
4
3.
mark fitting orientation to allow correct assembly.
If hydraulic fittings are to be removed from motor,
Figure 48
Installation (Fig. 47)
1.
2.
Hydraulic deck motor
Inlet hose
3.
4.
Relief valve
Cap screw
1.
fittings to motor using marks made during the removal
process to properly orientate fittings.
If hydraulic fittings were removed from motor, install
2.
draulic motor to the cutting unit with two cap screws.
Position o--ring to top of spindle housing. Install hy-
3.
47
Install hydraulic hoses to rotary motors using Figure
as a guide.
4.
essary (see Check Hydraulic System Fluid).
Makesurehydraulic tankisfull.Addcorrectoilifnec-
Groundsmaster 3500--D
Page 4 -- 73
Hydraulic System (Rev. D)
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3500 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |