Fuel Tank Installation (Fig. 21)
Position fuel tank to the machine.
DANGER
1.
Becausedieselfuelishighlyflammable,usecau-
tion when storing or handling it. Do not smoke
while filling the fuel tank. Do not fill fuel tank
while engine is running or hot, or when machine
is in an enclosed area. Always fill fuel tank out-
side and wipe up any spilled diesel fuel before
starting the engine. Store fuel in a clean, safety--
approved container and keep cap in place. Use
diesel fuel for the engine only; not for any other
purpose.
2. Connect both fuel hoses to the tank and secure with
hose clamps and fuel hose strap.
3. Connect seat switch to the electrical harness. Route
seat switch wire under seat support strap. Secure seat
support straps and seat to the frame with hex flange
head screws.
4.
wires and connector are not pinched and do not contact
any moving parts.
Check forcorrect seatoperation andthat seatswitch
Check Fuel Lines and Connections
5.
Fill fuel tank (see Fill Fuel Tank).
Check fuel lines and connections every 400 hours or
yearly, whichever comes first.
3
1.
stop engine, engage parking brake, and remove key
from the ignition switch. Unlatch and raise hood.
Park machine on a level surface, lower cutting units,
4
5
2.
Check fuel lines for deterioration, damage, leaks, or
loose connections. Replace hoses, clamps, and con-
nections as necessary.
1
2
Fuel Tank Removal (Fig. 21)
1.
stop engine, engage parking brake, and remove key
from the ignition switch. Unlatch and raise hood.
Park machine on a level surface, lower cutting units,
Figure 22
1.
2.
3.
Seat support strap
Hex flange head screw
Electrical harness
4.
5.
Fuel hose strap
Fuel hose
2.
Crossover fuel hose removal may assist to drain tank
completely.
Remove fuel from the tank into a suitable container.
3.
Remove seat and seat support straps from the
frame. Note location of spacers under front of seat sup-
port straps. Disconnect seat switch from the electrical
harness (Fig. 22).
4.
fuel tank. Pull tank from the machine (Fig. 22).
Remove fuelhosestrap andbothfuelhoses fromthe
Drain and Clean Fuel Tank
Drain and clean the fuel tank every 2 years. Also, drain
and clean the fuel tank if the fuel system becomes con-
taminated or if the machine is to be stored for an ex-
tended period.
1.
Remove fuel tank from the machine (see Fuel Tank
Removal).
2.
tank is free of contaminates and debris.
Flush fuel tank out with clean diesel fuel. Make sure
3.
Install fuel tank to the machine (see Fuel Tank Instal-
lation).
Groundsmaster 3500--D
Page 3 -- 17 Rev. D
Kubota Diesel Engine
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3500 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)