Removal
WARNING
Before disconnecting or performing any work
on the hydraulic system, all pressure in the
system must be relieved. See Relieving Hy-
draulic System Pressure in the General Infor-
mation section.
4
3
2
1.
Remove hydraulic cylinder from the frame using Fig-
ure 79 as guide.
1
2.
mark fitting orientation to allow correct assembly.
If hydraulic fittings are to be removed from cylinder,
Figure 80
3.
4.
1.
2.
Scissor frame
Lower frame
Sidewinder carrier
Gaps
Installation
1.
install fittings to cylinder using marks made during the
removal process to properly orientate fittings.
If hydraulic fittings were removed from cylinder,
2.
Installhydrauliccylinder totheframeusingFigure79
as guide.
3.
essary (see Check Hydraulic System Fluid).
Makesurehydraulic tankisfull.Addcorrectoilifnec-
4.
Adjust scissors mount as follows:
A. Shift sidewinder fully to the left (fully retract cylin-
der).
B. Loosen four cap screws and locknuts securing
the scissor mount to lower frame.
C. The gap between the scissor frame and lower
frame and the gap between the scissor frame and
the sidewinder carrier must be equal distances with-
in 0.060 inch (1.5 mm).
D. Tighten four cap screws and lock nuts to secure
the scissor mount.
Groundsmaster 3500--D
Page 4 -- 111
Hydraulic System (Rev. D)
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3500 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |