Toro 01088SL Rev F Service Manual Groundsmaster 3500 D Preface Publication

Troubleshooting
There are a number of factors that can contribute to un-
satisfactory quality of  cut, some of which  may be turf
conditions. Turf  conditions such as  excessive thatch,
“sponginess” or  attempting to cut  off too much  grass
height may not  always be overcome  by adjusting the
machine. It is important to remember that the lower the
height--of--cut, the more critical these factors are.
Remember that the “effective”  or actual height--of--cut
depends on cutting unit weight and turf conditions. Ef-
fective height--of--cut will be different than the bench set
height--of--cut.
Factors That Can Affect Quality of Cut
Factor
Possible Problem/Correction
1.
Maximum governed engine speed.
Check maximum governed engine speed. Adjust
speed to specifications if necessary.
2.
Blade speed.
All deck blades should rotate at the same speed.
See items in Troubleshooting Section of Chapter 4 --
Hydraulic System.
3.
4.
Tire pressure.
Check each tire’s pressure. Adjust to pressures
specified in Specifications Section of Chapter 6 --
Wheels and Brakes.
Blade condition.
Sharpen blades if their cutting edges are dull or nicked.
Inspect blade sail for wear or damage. Replace blade if
needed.
5.
Mower housing condition.
Make sure that cutting chambers are in good condition.
Keep underside of deck clean. Debris buildup will
reduce cutting performance.
6.
7.
8.
Height--of--cut.
Make sure all cutting units are set at the same
height--of--cut. Set units as specified in the Cutting Unit
Operator’s Manual.
Cutting unit alignment and ground following.
Roller condition.
Check lift arms and cutting unit pivot linkages for wear,
damage, or binding. Also inspect for bent or damaged
pivot shafts.
All rollers should rotate freely. Replace roller bearings
if worn or damaged.
Groundsmaster 3500--D
Page 7 -- 3
Cutting Units (Rev. D)
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 256 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website