Toro 01088SL Rev F Service Manual Groundsmaster 3500 D Preface Publication

12.Raise
area to another.
the cutting units when driving from one work
15.Before getting off the seat:
A.  Move traction pedal to neutral.
B.  Set the parking brake.
13.Do
nottouchengine,muffler,exhaustpipeorhydrau-
lic tank  while  engine is  running or  soon  after it  has
stopped because these areas could  be hot enough to
cause burns.
C. Disengage  the  cutting  units  and  wait  for  the
blades to stop spinning.
14.If
normally, stop immediately. Turn engine off, wait for all
motion to stop and inspect for damage.
a cutting unit strikes a solid object or vibrates ab-
D. Stop the engine and remove key from the ignition
switch.
16.Whenever
machine is  left unattended,  make sure
key is removed from ignition switch and parking brake
is set.
Maintenance and Service
1.
chine, stop the engine and remove key  from switch to
prevent accidental starting of the engine.
Before servicing or making adjustments to the ma-
7.  If major repairs are ever needed, or if assistance is
desired, contact an Authorized Toro Distributor.
8.
Toreducepotential  firehazard, keeptheenginearea
2.
not defeat interlock system. It is for your protection.
Checkperformanceofallinterlockswitches   daily.Do
free of excessive grease, grass, leaves and accumula-
tion of dirt.
3.
tion, frequently check and keep all  nuts, bolts, screws
and hydraulic fittings tight.
To ensure entire machine is in good operating condi-
9.  If the engine must be running to perform  a mainte-
nance adjustment, keep hands, feet, clothing, and any
other parts of the body away from the cutting units and
any moving parts. Keep everyone away.
4.
Make sureall hydraulic line connectors are tight,and
all hydraulic hoses and lines are in good condition be-
fore applying pressure to the system.
10.Do not overspeed the engine by changing governor
settings. Toassure safety and accuracy,have anAutho-
rized Toro  Distributor check  maximum engine  speed
with a tachometer.
5.
Keep body and hands away from pin  hole leaks or
nozzles that eject hydraulic  fluid under high pressure.
Use paper or cardboard, not hands, to search for leaks.
Hydraulic fluid escaping under pressure can have suffi-
cient force to penetrate skin and do serious damage. lf
fluid is  injected into the  skin it  must be surgically  re-
moved within a few hours by a doctor familiar with this
form of injury or gangrene may result.
11.Enginemustbeshutoffbeforechecking    oiloradding
oil to the crankcase.
12.To
insureoptimumperformance  andsafety,usegen-
uine TORO  replacement parts  and accessories.  Re-
placement  parts   and  accessories   made  by   other
manufacturers could be dangerous, and such use could
void the product warranty of The Toro Company.
6.
Before disconnecting or performing any work on the
hydraulic system,  all pressure in  system must  be re-
lieved by stopping engine and lowering cutting units to
the ground.
Groundsmaster 3500--D
Page 1 -- 3  Rev. F
Safety
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 256 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website