Removal
2
WARNING
Before disconnecting or performing any work
on the hydraulic system, all pressure in the
system must be relieved. See Relieving Hy-
draulic System Pressure in the General Infor-
mation section.
1
3
1.
using Figure 81 as guide.
Remove front lift cylinder from the frame and lift arm
Figure 82
1.
2.
Lift cylinder
Hydraulic hoses
3.
Clearance
2.
If hydraulic fittings are to be removed from lift cylin-
der, mark fitting orientation to allow correct assembly.
Installation
1.
install fittings to cylinder using marks made during the
removal process to properly orientate fittings.
If hydraulic fittings were removed from lift cylinder,
IMPORTANT: With lift arms raised fully, hydraulic
hosesshouldberoutedasshowninFigure82.Make
sure clearance between hydraulic hose and lift arm
is from 0.040 to 0.120 inches (1.0 to 3.0 mm). Do not
loosen hoses for repositioning without relieving
system hydraulic pressure first.
2.
Install front lift cylinder to the frame and lift arm using
Figure 81 as guide.
3.
essary (see Check Hydraulic System Fluid).
Makesurehydraulic tankisfull.Addcorrectoilifnec-
4.
Adjust front lift arm (see Adjust Front Lift Arm in
Chapter 7 -- Cutting Units).
Groundsmaster 3500--D
Page 4 -- 113
Hydraulic System (Rev. D)
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3500 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |