Check Air Filter, Dust Cup, & Burp Valve
Compressed Air Method
The air cleaner body, air filter, dust cup, and burp valve
should be checked daily, prior to operation.
A. Blow compressed air from inside to the outside of
dry filter element. Do not exceed 100 psi to prevent
damage to the element.
1.
Park machine on a level surface, lower cutting units,
stop engine, engage parking brake, and remove key
from the ignition switch. Unlatch and raise hood.
B. Keepairhosenozzleatleast2inches(5cm)from
thefilter.Movenozzleupanddownwhilerotatingthe
filter element. Inspect for holes and tears by looking
through the filter toward a bright light.
2.
possible air leaks. Make sure dust cup seals completely
to the air cleaner body.
Check air cleaner body for damage that could cause
6. If filter is being replaced, inspect new filter for ship-
ping damage. Check sealing end of filter. Do not install
a damaged filter.
3.
4.
engine and radiator are secured tightly and free of pos-
sible air leaks.
Check burp valve and dust cup for damage.
Makesureairhoses connecting theaircleaner tothe
7.
Insert new (or cleaned) filter properly into air cleaner
body. Make sure filter is sealed properly by applying
pressure to outer rim of filter when installing. Do not
press on flexible center of filter.
Service Air Filter, Dust Cup, & Burp Valve
8.
is positioned with TOP side up.
Reinstall cover and secure latches. Make sure cover
The air cleaner filter should be serviced every 50 hours,
and more frequently in extremely dusty conditions. The
filter element should be replaced every 200 hours.
1.
stop engine, engage parking brake, and remove key
from the ignition switch. Unlatch and raise hood.
Park machine on a level surface, lower cutting units,
1
2
2.
cleaner body.Separate cover frombody.Clean insideof
air cleaner cover.
Release latches securing air cleaner cover to air
3.
amount of dust dislodged. Avoid knocking filter against
air cleaner body.
Gentlyslidefilteroutofaircleanerbodytoreducethe
4.
Inspect filter and discard if damaged. Do not wash or
3
reuse a damaged filter.
Figure 17
3.
IMPORTANT: Do not over service the air filter ele-
ment; damage may result.
1.
2.
Latch
Dust cup
Burp valve
5.
Air filter can be cleaned either by washing or using
compressed air:
1
Washing Method
A. Prepare solution of filter cleaner and water. Soak
filter element about 15 minutes. Refer to directions
on filter cleaner carton for complete information.
B. After soaking filter for 15 minutes, rinse it with
clear water. Maximum water pressure must not ex-
ceed 40 psi to prevent damage to the filter element.
Rinse filter from clean side to dirty side.
2
C. Dry filter element using warm, flowing air (160oF
maximum), or allow element to air--dry. Do not use a
light bulb to dry the filter element because damage
could result.
Figure 18
2.
1.
Filter element
Air cleaner body
Kubota Diesel Engine
Groundsmaster 3500--D
Page 3 -- 14
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3500 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)