Adjust Front Lift Arms
1.
units, stop engine, engage parking brake, and remove
key from the ignition switch.
Park machine on a level surface, fully raise cutting
2
1
IMPORTANT: Keep front cutting units on the lift
arms when performing this adjustment.
3
2.
plate bracket is from 0.18 to 0.32 inch (4.6 to 8.1 mm)
(Fig. 4).
Make sure clearance between each lift arm and floor
3.
If the clearance is not in this range, attain proper
clearance as follows:
Figure 4
A. Lowerfrontliftarms,stopengine,engageparking
brake,andremove keyfromtheignition switch.Back
off stop bolts if reducing the clearance between the
lift arm and the floor plate bracket (Fig. 5).
1.
2.
Lift arm
Floor plate bracket
3.
Clearance
B. Adjust front hydraulic cylinder by backing off jam
nut on the cylinder, removing the pin from the clevis,
and rotating the clevis (Fig. 6).
1
2
3
C. Install pin to clevis. Fully raise front lift arms and
check clearance. Repeat steps AandBifnecessary.
D. Tighten jam nut on the hydraulic cylinder when
clearance is correct.
IMPORTANT: The lack of clearance at the front
stops can damage the lift arms.
4.
With the front lift arms fully raised, make sure clear-
ance between each lift arm and stop bolt is from 0.005
to 0.040 inch (0.13 to 1.02 mm). If the clearance is not
in this range, adjust stop bolts as necessary (Fig 5).
Figure 5
3.
1.
2.
Stop bolt
Lift arm
Clearance
2
1
Figure 6
1.
Hydraulic cylinder
2.
Jam nut
Groundsmaster 3500--D
Page 6 -- 5
Wheels, Brakes,and Chassis
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3500 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |