Toro 01088SL Rev F Service Manual Groundsmaster 3500 D Preface Publication

Lift Circuit (Down)
Lower Cutting Units
the cap end of the lift cylinders. Flow from the cap end
of the lift cylinders causes the cutting units to lower. At
the same time, the fluid relieved from the cap end of the
lift cylinders goes into the rod end of the cylinders and
back through the hydraulic manifold to the hydrostat.
Circuit operation for lowering the cutting units is similar
to raising them. However, pressure is relieved from the
lift cylinders, and this action allows them to lower.
During conditions of not lifting or lowering cutting units,
flow from the gear pump is by--passed through the pow-
er steering valve, 2--spool lift/sidewinder valve, and hy-
draulic manifold directly to the hydrostat and the charge
relief valve. Flow then returns to gear pump (P1) inlet.
When the cutting unit shift lever is released, spring ac-
tion returns and detents the valve into the float position
while by--passing flow back to the hydrostat.  The pilot
valveremainsshiftedtoallowtheliftcylinderstofloatun-
til the lift control valve is moved to the raise position.
When the cutting units are to be lowered,  the 2--spool
valve is positioned by moving the cutting unit shift lever
to LOWER. Pressure from  gear pump (P2) is used to
shift the pilot valve in the 2--spool valve. This shifting of
the pilot valve allows hydraulic pressure to relieve from
The logic  cartridge valve (LC1)  in the manifold  block
maintains 250 PSI (17.2 bar) back pressure  on the lift
cylinders. This counterbalance pressure transfers cut-
ting unit weight to the machine to improve traction.
Groundsmaster 3500--D
Page 4 -- 17
Hydraulic System (Rev. D)
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 256 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website