Replace Hydraulic Oil Filter
The hydraulic system oil filter must be changed initially,
after the first 10 hours of operation, and thereafter every
200
hours of operation or yearly, whichever comes first.
Use a genuine Toro oil filter (Part No. 54--0110) for re-
placement.
1
IMPORTANT: Use of any other filter may void the
warranty on some components.
1.
ting units, stop the engine, engage the parking brake
and remove key from ignition switch.
Position machine on a level surface, lower the cut-
2
2.
draulic tank to prevent draining the hydraulic tank.
Clamp hose leading to the oil filter head from the hy-
Figure 39
1.
Hydraulic oil filter
2.
Rear wheel
3.
Clean area around filter mounting surface. Place
drainpanunderfilterandremovefilter.Properlydispose
of filter.
4.
Fill the new filter with hydraulic fluid and lubricate fil-
ter gasket.
5.
on until filter gasket contacts mounting plate. Thentight-
en filter an additional 3/4 turn.
Assure filter mounting surface is clean. Screw filter
6.
liters) of hydraulic fluid. Refer to Change Hydraulic
Fluid. Remove clamp from hydraulic hose.
Fill hydraulic tank with approximately 6 gallons (22.6
7.
purge air from the hydraulic system. Stop the engine,
check for leaks, and re--check hydraulic fluid level.
Start engine and let run for about two minutes to
Hydraulic System (Rev. D)
Page 4 -- 58 Rev. F
Groundsmaster 3500--D
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 3500 D |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)