6.
Inspect hub, shifter, synchro key and synchro spring:
A. Inspect hub for worn or damaged spline.
B. Inspect shifter for chipping or damaged chamfer.
C. Inspect synchro keys for wear or damage.
D. Inspect synchro springs for wear or damage.
E. The shifter should move freely on the hub.
F. Measure the clearance between shifter groove
and fork. Replace shift fork, if the clearance exceeds
.039
in. (1.0 mm).
Figure 58
7.
Inspect main shaft:
A. Inspect main shaft for worn or damaged surface.
If O.D. of needle bearing surface is less than .864 in.
(21.95
mm), replace the main shaft.
B. Inspect lip portion of oil seal for wear or damage.
C. Insert spline in clutch disk and check for exces-
sive looseness and free sliding of clutch disk hub.
Figure 59
8.
Inspect both snap ring (item 3) and shim(s) (items 2
and 4) for damage. Replace all parts if any part is
cracked or broken (Fig. 60).
3
4
1
2
Figure 60
Drive Train
Page 6 – 34
Workman 3000/4000 Series
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Workman 3000, Toro Workman 4000 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |