Drive Shaft Universal Joint Service
1.
Remove drive shaft from vehicle (see Stub Axle and
Drive Shaft Service).
2.
Remove snap rings (Item 1).
IMPORTANT: Yokes must be supported when re-
moving and installing bearings to prevent bending.
3.
While supporting yoke, use a press to remove cross
7
and bearings (Item 2).
6
4.
To install new cross and bearings:
5
A. Apply a coating of grease to bearing bores.
B. Press one bearing partially into yoke (Item 3).
C. Insert cross into yoke and bearing.
4
2
3
1
D. Hold cross in alignment and press bearing in until
it hits the yoke.
Figure 10
E. Install snap ring into groove by first bearing cap
installed.
1.
Snap ring
5.
6.
7.
Seal
Shaft
Tube yoke
2.
3.
4.
Cross and bearings
End yoke
Yoke and hub
F. Place second bearing into yoke bore and onto
cross shaft. Press second bearing into yoke.
G. Tap axle yoke outward with hammer and align-
ment punch to allow 2nd snap ring to fit. Install snap
ring.
H. Repeat procedure for other yoke.
I. Grease cross until grease comes out of all four (4)
cups.
Drive Train
Page 6 – 14
Workman 3000/4000 Series
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Workman 3000, Toro Workman 4000 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)