Toro 03126SL Rev C Service Manual Serial No 240000001 Above Workman 3000 4000

Fuel Tank Removal (Fig. 6)
Put vehicle on  a level surface and engage  parking
brake. Stop  the engine and  remove key  from ignition
switch. Allow engine to cool.
Fuel Tank Installation (Fig. 6)
1.
1.  Check felt  straps (item  27) and  replace if worn  or
damaged.
IMPORTANT: When positioning fuel tank to vehicle,
make sure that hydraulic lift cylinder does not con-
tact tank.
2.
bed is raised, place safety support on  lift cylinder (see
Operator’s Manual).
Raise or remove the  bed or other attachment(s). If
2.
Position fuel tank to  tank straps and fuel tank  sup-
3.
itive battery  cable. Remove battery  from vehicle  (see
Operator’s Manual).
Disconnect negative battery cable first and then pos-
ports. Hook tank  straps to fuel  tank supports. Tighten
socket head screws and lock nuts to secure fuel tank.
3.
If fuel  fitting was removed  from tank, apply  thread
IMPORTANT: Review  safety information regarding
fuel handling in the Operator’s Manual and Chapter
sealant to threads  of fitting before installing fitting  into
tank.
2
– Safety.
4.
Connect electrical wiring to the fuel sender.
4.
13)
fuel from the fuel tank into a suitable container.
Loosen hose clamp and disconnect fuel hose (item
from fuel filter located on right side frame rail. Drain
A.  Connect blue/white wire with ring terminal to the
center  fuel sender  terminal  and  secure with  lock
washer and hex nut.
5.
17)
Loosen hose clamp  and remove return  hose (item
from fitting on top of tank.
B.  Connect black (ground) wire with the screw (item
6)
that is closest to the frame rail.
NOTE:  To prevent fuel leakage, do not loosen lower nut
on fuel sender stud.
C. Apply skin–over grease to the wire terminal con-
nections  and  cover center  terminal  with  harness
boot.
6.
Disconnect electrical wiring from the fuel sender on
the fuel tank.
5.
Connect return hose to fitting on top of tank and se-
7.
Loosen socket head screws (item 25) and lock nuts
cure with clamp.
(item 23) to allow tank straps to be unhooked from fuel
tank supports.
6.
secure with clamp.
Connect fuel hose from tank outlet to  fuel filter and
8.
Remove fuel tank from vehicle.
CAUTION
Connecting battery cables to the  wrong battery
post could result in personal injury and/or dam-
age to the electrical system.
7.
Position battery in vehicle (see Operator’s Manual).
Connect positive battery  cable first and then  negative
battery cable.
8.
Lower or install the bed or other attachment(s).
9.
Fill fuel tank (see Operator’s Manual). Check for fuel
leakage and correct if found.
Workman 3300–D/4300–D
Briggs/Daihatsu Diesel Engine
Page 4 – 11
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 302 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website